TC drive sprocket

[Half-breeder]

So what would be the speed at a...

Bookmark this for the 'next' time you even "THINK" of the above phrase... again...

 

[bocanegramusic]

You could have messaged me privately and told me that as a warning instead putting my on blast in front of everyone on this thread. Kinda new to this whole forum thing and was just hoping for some advice and help.
But hey, thank you for the heads up and being so forceful with your position as moderator. I guess being new and unaware of rules requires others to shove them in your face for compliance.
I will do my best to follow the rules and obey the law.

 

[bocanegramusic]

Why is there so much hostility here? Because all questions are stupid? I can appreciate the help, but we can work to do better in not being so condescending. I am definitely no expert and thank goodness because of I were, I might also be condescending to others that don't know a **** thing....
At least I admit I have no clue

 

[Denny]

Dude you need to back off on the moderators. They have the thankless job of keeping us in line. At 37 posts you should have been here long enough or at least read the rules when you signed on, you can read right? I guess not because you did not even fill out you're location like they ask you to.

Denny

 

[landuse]

Bookmark this for the 'next' time you even "THINK" of the above phrase... again...

You could have messaged me privately and told me that as a warning instead putting my on blast in front of everyone on this thread. Kinda new to this whole forum thing and was just hoping for some advice and help.
But hey, thank you for the heads up and being so forceful with your position as moderator. I guess being new and unaware of rules requires others to shove them in your face for compliance.
I will do my best to follow the rules and obey the law.

First of all, half breeder is not a moderator. The active mods around here are myself, Fabroman and Robertdjung (when he can).

Do not take what other people say to heart. There are no stupid questions on this forum. We were all noobs at one stage, and most of us also knew nothing when we started out. I was totally clueless . After a lot of help from people on the forum i can now strip an engine and rebuild it from the ground up.

Continue doing what you are doing, and ask the questions that you are asking. I suppose the only time people will get annoyed with noobs is if they do not listen to the advice given.

We will get you and your kart rolling if it is the last thing we do. Please do not be turned away by a few people who might rub you the wrong way. Karting is supposed to be fun

 

[Half-breeder]

Just giving you a link to the calculator... the forum is a 'publicly' view forum... so anyone reading this thread... or pretty much any other thread... and wondering the same question(s)... will also have the link to bookmark. (The reason I didnt PM you... plus I dont know you like that to be PMing you... IMO).

And there are no 'stupid' questions. Just questions that 'can' be answered on one's own, if 'searched/directed' to said answer.

Trying to visualized my attitude w/ a 1 line, 'helpful' sentence... c'mon now... excuse the French and the German but WTF, over?!... I nolonger help here often, and when/if I do... 'why' would I have an attitude...? Im not paid to give info... nor am I given anything for the info given. Im sorry I forgot to add the thumbs up icon... its kinda late now and at work... I have other places for my thumb to be at this moment.

 

[Half-breeder]

First of all, half breeder is not even close to being a moderator.

REALLY?!... just HAD to add 'not even close' huh?!...

 

[landuse]

REALLY?!... just HAD to add 'not even close' huh?!...

LOL. I didn't mean it to sound as bad as it does when i read it now for the second time. Sorry about that I have changed it

 

[bocanegramusic]

I appreciate what you said about getting my daughter's kart going. It really means a lot. Thank you all for your help and support through this. I may have vented a bit much, but I assure you all, I just want this to work....I dont know how, but with all of this knowledge, I know it's possible!!!

 

[bocanegramusic]

Dude you need to back off on the moderators. They have the thankless job of keeping us in line. At 37 posts you should have been here long enough or at least read the rules when you signed on, you can read right? I guess not because you did not even fill out you're location like they ask you to.

Denny

And see...my point on certain people. Do not put words in my mouth Danny. I never said anything about no appreciating what they do. Do not misconstrue what I had to say.
And also, it's over. No harm, no foul.

 

[bocanegramusic]

Just giving you a link to the calculator... the forum is a 'publicly' view forum... so anyone reading this thread... or pretty much any other thread... and wondering the same question(s)... will also have the link to bookmark. (The reason I didnt PM you... plus I dont know you like that to be PMing you... IMO).

And there are no 'stupid' questions. Just questions that 'can' be answered on one's own, if 'searched/directed' to said answer.

Trying to visualized my attitude w/ a 1 line, 'helpful' sentence... c'mon now... excuse the French and the German but WTF, over?!... I nolonger help here often, and when/if I do... 'why' would I have an attitude...? Im not paid to give info... nor am I given anything for the info given. Im sorry I forgot to add the thumbs up icon... its kinda late now and at work... I have other places for my thumb to be at this moment.

If give you a hug if I could. Just because I appreciate you and you help. Just sayin

 

[Half-breeder]

If give you a hug if I could. Just because I appreciate you and you help. Just sayin

No need unless you got ( . )( . )'s... then PM me... hehe.

Sorry bout my reply there... I mentally/visually iggy/over-look afew ppl on here... didnt realize you werent even talking to me... sorry.

I woulda edited but not EVERYONE has an 'edit' buttom.... (Pulls his thumb outta his ....) It takes a 'special' to get it removed

 

[Half-breeder]

... but HONESTLY (normally I dont care cause I dont read EVERY post) for folks like me... it 'is' easier on us, if you use YOUR edit button... and for some unbelievable reason you 'may' wanna fill out your profile (atleast you 'general' location)... just because there are a few that wont 'like' you if you dont... and their not even moderators... BUT they 'may' have a good bit of info to give ya... so humor em till you know more than me... I 2yrs ago I was in your shoes... just not w/ such a complex drive system.

 

[bocanegramusic]

Haha, thanks brotha. I do appreciate that. I will use my edit button! And of course I will fill out the ol profile just so I can get that extra help.
I have no clue why the person did this, but I hope I/we can figure it out!

 

[OzFab]

I think there's a bit of confusion here, post #62 was directed at me, not h/b...

bocanegramusic, the forum rules are in the intro section; as Denny pointed out, if you'd read them, you would've known about multi posting.

I find it interesting that the very next post after "attacking" me (post #63) was yours, meaning, you're still multi posting...

For future reference, to avoid confusion, use the Quote button

 

[Poboy kartman]

Why is there so much hostility here? Because all questions are stupid? I can appreciate the help, but we can work to do better in not being so condescending. I am definitely no expert and thank goodness because of I were, I might also be condescending to others that don't know a **** thing....
At least I admit I have no clue

Dude....Count your blessings....You have no idea how many bullets you have dodged.

 

[bocanegramusic]

I think there's a bit of confusion here, post #62 was directed at me, not h/b...

bocanegramusic, the forum rules are in the intro section; as Denny pointed out, if you'd read them, you would've known about multi posting.

I find it interesting that the very next post after "attacking" me (post #63) was yours, meaning, you're still multi posting...

For future reference, to avoid confusion, use the Quote button

Well mr fabroman, I appreciate you coming back to have some more input. Attacking? I assure you, Attacking is a bit much for what I had to say. More along the lines of, letting you know how it should be. Have a little more courtesy. Have a little more respect. And above all, be a human being. No one is perfect and I'm certain everyone has not read all the rules, nor have they studied them to interpet grey zones. So do me a favor and back off a bit. There are plenty of people in here that told me what to do and for you to come back and start your say, tells me you are selecting me as a target for your frustations. I do appreciate your moderator skills as they are fine tuned to the small things. Thank you for being persistent and putting your best foot forward here. You are the best.
Oh, I never said you were a mean and ugly person, I just said, "hey, could have messaged me to point some issues out. No need to blast me in front of everyone. We are all adults here. So treat others as such."

What's the first rule on there? Be respectful. So show some and I will show you some. It is a two way street.

Double posting CAN BE considered rude. Doesn't mean it always is TAKIN that way.

 

[bocanegramusic]

Why am I here if all I can do is get info on rules....I thought I was here to get help on my kart....thank you those who have helped me.

 

[bocanegramusic]

Dude....Count your blessings....You have no idea how many bullets you have dodged.

"Dude" you don't think I know I am fighting a losing battle? I get that people have been on here for years....and here I am a new individual, asking others to change their ways. Which wouldn't necessarily be bad thing.... In hopes that we can do a better job interacting with one another and getting good info on kart building. But alas....I see your point.

 

[itsid]

where's mckutzy when we need him??
*sheesh*

okay, I'll say it.. this time..
IBTL

'sid