Doc Sprocket
*********
In just a few days, I'm doing a fly-in fishing trip with my dad. We're driving waaay up north, throwing our gear into a bush plane, and getting dropped in a lake right smack in the middle of bloody nowhere for a week of fishin' fun.
We needed hard cases to put our rods into, to allow them to survive being stuffed in the tail of a Cessna... Sure- you can buy hard cases that'll hold 2-3 rods... for about $100 locally at Bass Pro. Bugger that. Off to home depot I go.
We bought a 10' length of 4" PVC sewer pipe, two end caps, two thread adapters, two clean-out caps, and some glue. That was enough for two 4' rod cases, and worked out to less than $20 each, not including paint.
I already had some paints kicking around, as well as a camo ratchet strap with a broken ratchet. So here's what I made! It's entirely weathertight, with a gasket on the screw cap. The strap is adjustable, thanks to some buckles I robbed from a tool bag!
EDIT- Don't laugh too hard at my paint job- It was my first camo attempt on anything...
We needed hard cases to put our rods into, to allow them to survive being stuffed in the tail of a Cessna... Sure- you can buy hard cases that'll hold 2-3 rods... for about $100 locally at Bass Pro. Bugger that. Off to home depot I go.
We bought a 10' length of 4" PVC sewer pipe, two end caps, two thread adapters, two clean-out caps, and some glue. That was enough for two 4' rod cases, and worked out to less than $20 each, not including paint.
I already had some paints kicking around, as well as a camo ratchet strap with a broken ratchet. So here's what I made! It's entirely weathertight, with a gasket on the screw cap. The strap is adjustable, thanks to some buckles I robbed from a tool bag!
EDIT- Don't laugh too hard at my paint job- It was my first camo attempt on anything...
Attachments
Last edited:
Ran into the kitchen, ran out again before the wife could catch me! So- let's see if I can catch something on a real spoon!