Doc Sprocket
*********
So... Here's the situation. I'm getting very close to yanking the GX340 off of my kart, and stuffing in the XV250 twin that I had planned for another project. I'll probably sell the GX to recoup some funds.
What that leaves me with, is a perfectly functional Comet 40 set to potentially use on my upcoming 6.5 clone-powered project.
I can adapt the shaft size, that's not a problem. Here's the problem- according to Comet's specs, the minimum hp rating for the 40 is 8hp. I would be using a very lightly modded 6.5. Can anyone foresee any potential problems/solutions?
Cheers! Chris
What that leaves me with, is a perfectly functional Comet 40 set to potentially use on my upcoming 6.5 clone-powered project.
I can adapt the shaft size, that's not a problem. Here's the problem- according to Comet's specs, the minimum hp rating for the 40 is 8hp. I would be using a very lightly modded 6.5. Can anyone foresee any potential problems/solutions?
Cheers! Chris