Flywheel explosion evidence

Status
Not open for further replies.

Russ2251

AZUSA:Powered by LAWN-BOY
Messages
6,622
Reaction score
47
Location
Huntington Station, Long Island, NY
That flywheel business is pretty crazy! I have yet to see one break under any circumstance.
I got tired of arguing about it.
I fear flying more...or getting struck by lightening...
Much better chance of winning Power Ball than witnessing a flywheel explosion.
Someone is making mucho dinero on this billet flywheel crap...all based on an unfounded fear.
 

r_chez_08

Should be in the shop...
Messages
4,827
Reaction score
14
Location
Cornwall, UK
Haha interesting that there is no evidence. I agree with most people, the ones that go are the ones that are abused, and revving at 7,000+ rpm.
Rob
 

robbie

New member
Messages
857
Reaction score
9
Location
Osceola, Missouri
It makes me wonder if they are beating the flywheel with a hammer, causing cracks. There's no good reason why a piece of cast metal should fly apart at high RPM.
 

Bluethunder3320

New member
Messages
5,677
Reaction score
39
i just removed the governor in my clone, ran it for the first time no gov today. it got going... i full throttled it and it sounded reeeeeaaalll smooth. i cant imagine the flywheel busting though. just in case... i had my friend step away from the end of the crank case and away from the blower housing... lollolol
 

sideways

Unfinished projects king.
Messages
1,501
Reaction score
2
Location
Perth, Western Australia
Should be able to withstand more than that...say 10,000 rpm.

I know in the 1960s go kart racers would modify their Victas and get anywhere up to about 16'000 rpm out of them.

Thats with a custom made head, porting, case stuffing, big carb and a megaphone exhaust. Standard rod and cast Aluminium flywheel. On the lawnmower they originally came off they did 4000rpm.

While a few flywheel explosions did happen it was much like the clone flywheels thing, one in a million.

I think we're pretty safe, just don't treat your flywheel like crap.

Thanks

Hayden
 

Bluethunder3320

New member
Messages
5,677
Reaction score
39
Under a load I hope.

uhhh... no :D

well you never know if the guy smashed it with a hammer or something!

the HF guy told me even if my engine is still running at the end of 2 years come and get a new one just because. well... maybe thats what happened lol.
 

Russ2251

AZUSA:Powered by LAWN-BOY
Messages
6,622
Reaction score
47
Location
Huntington Station, Long Island, NY
Never EVER full throttle an engine without a load.
You may get away with it a couple or even a few times...but why take the chance?
Putting a load on engines eases the internal harmonics.
Harmonics (for the most part) is what destroys rods.
Once the rod goes...wave goodbye to the block as well.
 

Bluethunder3320

New member
Messages
5,677
Reaction score
39
Never EVER full throttle an engine without a load.
You may get away with it a couple or even a few times...but why take the chance?
Putting a load on engines eases the internal harmonics.
Harmonics (for the most part) is what destroys rods.
Once the rod goes...wave goodbye to the block as well.

yeah... well this engine is more of my experimental engine... it will most likely blow up sooner or later. but... i have the warranty so i can always just get a brand new one.
 

Bluethunder3320

New member
Messages
5,677
Reaction score
39
Maybe...sometimes warranties change. Then SOL.
Again, why take the unnecessary chance?

well i am seeing what different things effect the engine in what way... i pulled the governor, drilled the main jet.. messed with the linkages.. maybe ill do something to timing or throwing briggs valve springs into it.

i think im guaranteed a replacement though.

i ran it once with no load im going to get a rear wheel soon :D
 

devino246

Official DIYGK Chem Nerd
Messages
3,856
Reaction score
17
Location
Lynchburg, VA
well i am seeing what different things effect the engine in what way... i pulled the governor, drilled the main jet.. messed with the linkages.. maybe ill do something to timing or throwing briggs valve springs into it.

i think im guaranteed a replacement though.

i ran it once with no load im going to get a rear wheel soon :D

They wont replace it if they see you've modded it.
 
Status
Not open for further replies.
Top