Flywheel explosion evidence

Status
Not open for further replies.

redsox985

Active member
Messages
4,092
Reaction score
12
Location
PA
This whole return scheme is pending it doesn't explode with you sitting inches from it...
 

Russ2251

AZUSA:Powered by LAWN-BOY
Messages
6,622
Reaction score
47
Location
Huntington Station, Long Island, NY
Engine belonged to a guy that posted here often.
He disconnected governor and believed that to be the cause of ensuing carnage.
After I played a game of '20 questions', he revealed that he cranked it up, no load, to see how much it could take.
He found out.
He does not post anymore.
Note last pic. That is a bullet hole where a needle bearing passed through crankcase.
 

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
Hopefully, he learned something. Expensive way to learn, though.
The only thing that truly worries me about the governor delete I'm in the process of doing right now is the prospect of having a sudden load loss under the wrong conditions. For example, accellerating full throttle getting towards peak, and having the chain or belt fail while your foot is still on the floor. I can only pray I'd nail the kill switch fast enough. Flywheel or no flywheel, there is a potential for breakage there.
 

Bluethunder3320

New member
Messages
5,677
Reaction score
39
thats something to think about. i did some burnouts with governor and it was working hard then the chain fell off and it backfired. actually in my youtube video right when i tested it for the first time.
 

noktrnl80

New member
Messages
2
Reaction score
0
shows you get what you pay for. not agenst clones at all, own a couple myself but theres 2 ways to find out how much it can take; find out for yourself & look at things like this n learn:thumbsup:
 

Bluethunder3320

New member
Messages
5,677
Reaction score
39
my clone was wonderful today. took a half hour to start and then started running like crap and spewing white smoke everywhere..........

anyways any more evidence?
 

Blazkowiez

Kart Aficionado
Messages
2,538
Reaction score
48
Location
Houston, Texas
Or he tipped the engine over in his basement? He is the dude who made the vent for his projects? Or am I getting him confused with another poster.

Russ, if one of us wins powerball, we each get vipers.... deal right?
 

Bluethunder3320

New member
Messages
5,677
Reaction score
39
Or he tipped the engine over in his basement? He is the dude who made the vent for his projects? Or am I getting him confused with another poster.

Russ, if one of us wins powerball, we each get vipers.... deal right?

:D thats me.

over filled crank, eh? well i have 360* -ed the engine while wrking on it, but it is brand new.

let me check oil level....... yup wayy past the high level.
 

jeremybentham

New member
Messages
347
Reaction score
0
Location
Dutch Country
Another +1 for billet parts. Briggs flatty stock rod failure after governor removal. This was done with a stock cam and minimal motor work. (worked carb, intake, header, timing, jetting, etc.)
You know, the things that can be very easily/cheaply done by anyone.

Be careful, y'all.
 

Attachments

  • file-3.jpg
    file-3.jpg
    38.2 KB · Views: 7
  • file-2.jpg
    file-2.jpg
    32.4 KB · Views: 9
  • file-1.jpg
    file-1.jpg
    28.7 KB · Views: 5
  • file.jpg
    file.jpg
    43 KB · Views: 8

Bluethunder3320

New member
Messages
5,677
Reaction score
39
hmmm... well does anyone know of a billet rod for a 1975 tecumseh H60?

im most likely going to get one for my clone when i can get enough money.
 
Status
Not open for further replies.
Top