Yerf Dog 3202 for the grandkids...

jbracing62

New member
Messages
2
Reaction score
1
Hello and thanks for the add. I am putting together a 3202 that's been OOC for a long time. Going with a Predator 212 and an ebay torque converter. It's missing all kinds of stuff, found this site while looking for brake info.
 

panchothedog

Well-known member
Messages
2,788
Reaction score
3,740
Does it have a disc or band type brake on it now? It should have come stock with a 4" band style brake. Both band and drum are available from Go Power Sports as well as many other suppliers. Also welcome to the group.
 

jbracing62

New member
Messages
2
Reaction score
1
Does it have a disc or band type brake on it now? It should have come stock with a 4" band style brake. Both band and drum are available from Go Power Sports as well as many other suppliers. Also welcome to the group.
It has a 4 3/16" brake drum and nothing else but the pedal. The cable is missing, as are the mounts for the band. I ordered a band already, still trying to figure out the cable. When I got this thing a few years ago, it was all hacked up due to the PO trying to install a 600 cc motorcycle engine. Even the axle brackets are gone, but they are on the way and I can weld!
 

Snaker

Active member
Messages
341
Reaction score
182
Rounding up those bits and pieces can be a challenge, if you can source them at all.
Since you seem comfortable to fab a tad, this would be a good opportunity for a hydraulic brake build.
 
Top