nabisco_12
Kart Newb
I need a torq converter for my Briggs 8 horse, 30 series comet pm me with what u have...figure I would ask here b4 I buy a new one
wtb torq converter
- Thread starter nabisco_12
- Start date
- Status
nabisco_12
Kart Newb
Aren't 40's a bigger shaft?
firemanjim
Just kartin' around....
His 8hp briggs has a 3/4" shaft.... If he gets a 40series for it, he is stuck with ONLY being able to use it for an engine with a 3/4" shaft. 8hp and up are 1"..... You can GET an 8hp with a 3/4" shaft, but you won't find a 9 or 10 hp in a 3/4" shaft.....
kart bruiser
New member
i have a comet 40 series 1 inch driver with a 5/8ths inch driven so it fits on 30 series jackshaft setup 80 plus you cover shipping , never tested but looks fine
kart bruiser
New member
where does it say he has 3/4 inch shaft?
nabisco_12
Kart Newb
firemanjim
Just kartin' around....
Sorry to axxed and kb..... I've helped so many people,on a personal note, that I think all of the projects have combined into one big @$$ mess in my head. Yes, the OP does have a 1" shaft. I've confused his phone conversations with another members phone conversations....... My apologies.....
nabisco_12
Kart Newb
Just waiting on pm back from kart bruiser
firemanjim
Just kartin' around....
Just waiting on pm back from kart bruiser
With that 40, yes, it's time to up the power output......
kart bruiser
New member
sorry bout the wait but you have al the info and having all the stuff to go either would be nice so like i said i will sell you jackshaft settup withthe 20 tooth 40/42 pitch and 10 tooth on 5/8ths shaft with bearings and lock collar for 65 including shippiung
and the 40 series torque converter able to be use on same jackshaft
all for 150 shipping included
thats 2 full settups go either way
and the 40 series torque converter able to be use on same jackshaft
all for 150 shipping included
thats 2 full settups go either way
- Status