would a honda gx120 work

Status
Not open for further replies.

draggin

New member
Messages
2
Reaction score
0
I have a honda gx120 motor and i'm wanting to build an independent suspension gokart for my 7 year old son. Would this particular motor put out enough to move it? He is 49 in'' tall and weighs around 65lbs. The kart i am looking to build is one from spidercarts just to get him started. thanks. by the way, love the posts on this site. lots of great info.
 

landuse

Moderator
Staff member
Messages
18,804
Reaction score
613
Location
Pietermaritzburg, South Africa
The GX120 is a 4HP engine, and should be fine for your son. He is still light, and those karts aren't too heavy either. Once he gets older you might want to get a more powerful engine (if he is into speed), but for the moment a GX120 will do nicely.
 

r_chez_08

Should be in the shop...
Messages
4,827
Reaction score
14
Location
Cornwall, UK
The gx120 should be fine, make sure it is a non tapered shaft.
I would gear it low, eg. 15mph, and it should have enough torque.
 

Bluethunder3320

New member
Messages
5,677
Reaction score
39
why couldnt you use a tapered shaft? dosent that just mean it has threading for a sprocket?

no one i am aware of makes clutches for tapered shafts.

go kart clutches are ALL either 5/8", 3/4", or 1" shaft diameter.

go on ebay and get a honda shaft for it, it can be used, but if you get the engine for a steal than a shaft wont cost alot more.

or you could get a 6.5hp clone for $110....
 

draggin

New member
Messages
2
Reaction score
0
the cart is gonna be the itzy bitzy. and here is my other question, where can i get a reasonable priced but good torq-a-verter? and what exactly is a jackshaft?
 

Bluethunder3320

New member
Messages
5,677
Reaction score
39
a jackshaft is like an axle but there are 2 sprockets.

they are used to reduce gear ratio's.

 
Status
Not open for further replies.
Top