whats up everyone

[voided]

saying whats up, first post here and tryng to start it out the right way..

been trolling the forum for some time for info.

and now that i made my large purchases i thought it was time to sign up.

im here for info and pointers on building a parking lot "drifter" Shifter kart.

not sure one the make of my frame but i purchased it fairly cheap and then nabbed a kx250 from a towing company that couldnt sell it because the vins were scrapped off.

total so far i have into the project is 300 bux includng purchasing the gocart and dirtbike.

heres the kart frame im gonna use.. the dirtbike will be dropped off tomorrow and ill tear it down after i ride it some..

http://i185.photobucket.com/albums/...FB94816C-918-00000054CA552F4F_zps86d92ae2.jpg


thanks to anyone in advance for useful knowledge..

 

[voided]

if anyone would happen to know what type of frame it is, it would help me out greatly...

notice the front spindles are bolted on by 4 bolts to the frame. compared to one vertical pin/bolt.. i cant find any other frames like this.

 

[landuse]

Welcome to the forum!! It sounds like you got a great deal on that setup.

 

[voided]

Ianduse : I'm a pawnbroker so the frame was something that came thru the shop. The dirtbike Which came thru a friends tow company can't be sold, so I payed him for the motor and other items I would need off the dirtbike..

In the end ill give the tow company most of the frame, seat, front end, swing arm and tires and anything else I couldn't use and he will then send that stuff to be crushed.

 

[OzFab]

I'm a pawnbroker

That's always handy I'll bet you get some real bargains

Welcome to the forum

 

[jamyers]

Welcome to the insanity - I mean, forum!

Yeah, that's what it is...

 

[voided]

is it safe to say i have a coyote frame as its the only one ive seen with the following style bolt-on-ish spindles...

 

[voided]

and any way to strip frame down for new paint.

aircraft stripper ?
or just Paint over it with oil based?

 

[jamyers]

Sandblast ?

 

[voided]

That's a possibility