What Racing Frame do I have?

Status
Not open for further replies.

JoeM0e

New member
Messages
9
Reaction score
0
Location
Riverview, FL
Could you guys help me identify this go kart frame? It says 835 on the right spindle bracket. Also, it came with an aluminum gas tank that said coyote. I would really like to see a picture of the same one if you can find it somewhere. Thanks
 

Attachments

  • P01-03-04_05.11.jpg
    P01-03-04_05.11.jpg
    84.5 KB · Views: 23
  • P01-03-04_05.12[4].jpg
    P01-03-04_05.12[4].jpg
    72.4 KB · Views: 17
  • P01-03-04_05.13[2].jpg
    P01-03-04_05.13[2].jpg
    65.3 KB · Views: 14
  • P01-03-04_05.11[1].jpg
    P01-03-04_05.11[1].jpg
    83 KB · Views: 19
  • P01-03-04_05.13[1].jpg
    P01-03-04_05.13[1].jpg
    55.4 KB · Views: 13

bighead

New member
Messages
4,022
Reaction score
52
Location
Pacific Northwest USA
Here is a bug that I had to compare. I think was the Black Widow model if I remember right.
 

Attachments

  • CIMG0532.jpg
    CIMG0532.jpg
    121.4 KB · Views: 10
  • CIMG0529.jpg
    CIMG0529.jpg
    122.8 KB · Views: 11
  • CIMG0528.jpg
    CIMG0528.jpg
    96.6 KB · Views: 9
  • CIMG0526.jpg
    CIMG0526.jpg
    144.7 KB · Views: 10
  • CIMG0515.jpg
    CIMG0515.jpg
    130.7 KB · Views: 10

babzog

New member
Messages
73
Reaction score
0
No idea about the kart, but the master cyl is identical to mine, mounted on an older Birel chassis. If you need to rebuild it, the kits are only $15 but if the piston is in good shape, then you can just clean it up and locate new seals. I got mine at a local hydraulic supply/service center (owner also happens to run the the local karting shop, located in the same building).
 

JoeM0e

New member
Messages
9
Reaction score
0
Location
Riverview, FL
No idea about the kart, but the master cyl is identical to mine, mounted on an older Birel chassis. If you need to rebuild it, the kits are only $15 but if the piston is in good shape, then you can just clean it up and locate new seals. I got mine at a local hydraulic supply/service center (owner also happens to run the the local karting shop, located in the same building).

The master cylinder was seized when i got it, and the walls inside had deep scratches but I cleaned it up and it works fine
 
Status
Not open for further replies.
Top