what do i need?!?!!?

Status
Not open for further replies.

jeremybentham

New member
Messages
347
Reaction score
0
Location
Dutch Country
I'd drop the extra 8 pounds and get the 6.5 motor. You'll need a clutch that fits the shaft on the motor. Probably 5/8" or 3/4".

Clutches and gears (sprockets) are on ebay.uk/
 

anderkart

Moderator
Messages
6,432
Reaction score
392
Location
Surprise Arizona USA
Well that engines information says it has a: "STANDARD 20mm TYPE KEYWAY STRAIGHT 'Q' TYPE SHAFT".

That's good, that engine has the correct output shaft type for use on a go kart.

I entered the search term 20mm. centrifugal clutch into the UK ebay search window and found there's several clutches listed for sale that would work fine with that engine on a go kart.

As far as your rear sprocket goes, you'll need to find one that:

1- fits and bolts up to your axle or sprocket hubs bolt pattern.
2- is made for the same chain size as the clutch you purchase.
3- has the correct number of teeth for the gearing you want on your kart.

Do you already have the go kart?
If so, does it already have an axle sprocket?
 

r_chez_08

Should be in the shop...
Messages
4,827
Reaction score
14
Location
Cornwall, UK
If you want a 20mm clutch I have one I am refurbishing and I would sell to you with spare clutch shoes, and maybe new bushing if I could get hold of one. It is 219 chain 16t and silver in colour, as it is nickel plated.
Rob
 
Status
Not open for further replies.
Top