WeldingCity E71T-11 0.030"

[AltuveRules]

Anyone used this stuff? http://www.ebay.com/itm/WeldingCity...ss-Flux-Cored-MIG-Welding-Wire-/201448967719?

It's cheaper than HF and supposedly E71T-11= multipass and actual standard.

---------- Post added at 09:21 AM ---------- Previous post was at 09:18 AM ----------

Probably crap idk

 

[KartFab]

I bought some parts for a TIG torch from welding city on ebay because it was the cheapest. They get all their stuff from China and its not good quality, but worked for what I needed.

As far as saving money, what is so special about multipass vs like the standard stuff?

If I needed to do multiple passes, i would just clean up the weld with a wire wheel, then weld over top again with the er70s (you can also get the 10 lb hobart stuff for $5 less on ebay btw).

 

[AltuveRules]

I don't really need multi-pass, just thought it was nice and the HF stuff (and most other flux core) is just -gs which is "general" aka no standard. WeldCity pobably isn't really anyway though As far as er70s, isn' that mig? I havn't bought a cylinder yet. I probably will when I start running out of the 2lb I have now.

 

[tinamcjittles]

If you get any let us know how it works, I've been looking for wire that doesn't produce as much slag..

 

[AltuveRules]

Will do

---------- Post added at 07:51 PM ---------- Previous post was at 07:24 PM ----------

BTW I heard of some sort of "splatter spray".... Haven't used it personally, but I've heard it works really well.

 

[offroading73]

have been looking at the weldcity stuff to. there is a guy on youtube and he claims for a ac welder you lose more wire to splatter than with the harbor freight single pass. he also gets beautiful welds with his harbor freight 90amp.
https://www.youtube.com/watch?v=vCdafvRnMkc