Victa motors?

Status
Not open for further replies.

Bluethunder3320

New member
Messages
5,677
Reaction score
39
Get a Lawn-Boy. Still plenty around with parts readily available...on-line or otherwise.
Lawn-Boy Twins

that thing flies! :cheers2:

great job on it!

id get a lawn boy for my kart, but im looking for more of a low revving grunter than a screamer. for plowing snow and stuff! :thumbsup: a mini bike with that engine would be sweet.

my uncle used to have this green 2 stroke mower, it was a lawn boy, guessing 1970's. i think he threw it out though.

i wish i could have grabbed it but i was only like 9 years old.
 

sideways

Unfinished projects king.
Messages
1,501
Reaction score
2
Location
Perth, Western Australia
Excellent post!
Too bad these were never exported to US. I have a very keen interest in them (as with any 2 cycle engine).
I have seen 1 or 2 of them in local mower shops that were in for repair.
Edit:
I might add that L-B has also been around since early '50's.
Started by Ole Evinrude who's name should sound familiar to just about everyone on the planet.
Lawn-Boy History

Thank you! :)

I could send you one over if you want, they don't weigh much. The problem is finding a good one. 125s are rare as now and full crank 160s are getting there, almost all are covered in aluminium oxide. Of course, you'd want a new piston and seals, those are cheap though.

Lawn Boys interest me too, that history thing is cool, I didn't know they had been around so long, I thought they were a modern company! There isn't much history stuff on Victas, all of it's on forums and lawn mower sites.

Slightly related to evinrude, Victa made outboards with the 160 full crank on them, they were dirt cheap and they sold a fair few of them, apparently they were absolutely crap :roflol: they were really loud (all Victas are horrendously loud) and people always burnt themselves on them.

I thought you might like this site Russ, go to the engines sections to see some insane Victas, among other awesome old engines. :thumbsup: No McCullochs or Clintons here!

Thanks

Hayden
 

sideways

Unfinished projects king.
Messages
1,501
Reaction score
2
Location
Perth, Western Australia
good info there! i want to go buy a 50's victa 125 now, lol.

imagine if they still made them.

I wish I could get a '50's one, the lawn mower restorers (yes, seriously, lawn mower restorers) pay big $$$ for those though.

I wish they still made them... You can still get all the parts and they made literally millions of them so there's always one to fix up, most need a really good clean up though, they are 30+ year old neglected mower engines after all.

Thanks

Hayden
 

jman231994

New member
Messages
724
Reaction score
3
Location
Australia
I bought a good old 160cc victa from my local rubbish tip a few weeks ago. Took it home poured some fuel in and started 3rd or 4th pull. It just wouldnt turn off though. That was because the kill switch is in the carb and a little rubber grommet that makes it work had disappeared.

Besides that. They last forever. I read some stuff on the history of them, back in the 70's i think it was they actually ran a victa in the bottom of a pit full of stone for 3 weeks. Didnt stop once. Then they actually used it to crush the stones into aggregate. Simply amazing. Dont know if its true though.

But yea, as i think it was sideways said. They are absolutely everywhere and you dont even need to see them to recognise them cause the mufflers pretty much didnt even work straight from the factory. Haha.

I actually saw one of the victa twin engines on an auction site the other week. Sold for 25 bucks :O didnt say if it was working or not and i dont think i couldve modded it to go on my kart so i didnt buy it. :(

If your ever cleaning one though. Don't let degreaser and water get under the flywheel. It killed my ones condenser. A brand new condenser for it was only 15 bucks though.
 

jman231994

New member
Messages
724
Reaction score
3
Location
Australia
On a side note. About 6 months ago a victa came up on ebay that was from the 70s and had never left the box other than for the listing photos. Amazing really. It said it was in a timecapsule. Doesnt sound right to me.

Anyway heres some shots of my victa for my kart. Its still on the base so i can start it up. No mount made yet. Hopefully next weekend. It's smokey but hopefully its just my old fuel.
 

Attachments

  • DSCF4135.jpg
    DSCF4135.jpg
    101.3 KB · Views: 3
  • DSCF4132.jpg
    DSCF4132.jpg
    121 KB · Views: 2
  • DSCF4127.jpg
    DSCF4127.jpg
    77.1 KB · Views: 4
  • DSCF4161.jpg
    DSCF4161.jpg
    82.9 KB · Views: 6
  • DSCF4158.jpg
    DSCF4158.jpg
    88.6 KB · Views: 5
  • DSCF4155.jpg
    DSCF4155.jpg
    99.5 KB · Views: 3
  • DSCF4151.jpg
    DSCF4151.jpg
    129.5 KB · Views: 2

sideways

Unfinished projects king.
Messages
1,501
Reaction score
2
Location
Perth, Western Australia
**** that's a clean engine! Cleanest Victa I've ever seen! Kudos on getting it like that!

I've got one that's the same generation as yours, self propelled though, what do you reckon, just as good as yours? :roflol:

I've heard the quarry thing too, apparently they used to cut trees down with them too! Dunno how they did it, with a modified base I guess. :confused:

Mate, it's probably smoking because it's a 2 stroke, bluish grey smoke is good, white smoke is bad, white smoke usually means your crank seals are stuffed, they only cost a few $ but are a pain in the arse to fit.

If you do need new crank seals yours would have the 20mm ones, earlier ones had 17mm. Your mower shop should be able to tell you that though.

Thanks

Hayden
 

Attachments

  • SAM_1132.jpg
    SAM_1132.jpg
    124.8 KB · Views: 13

jman231994

New member
Messages
724
Reaction score
3
Location
Australia
Yea I spent almost a day cleaning it. Was really surprised when it came out that good. Only one fin bent on it and none broken off the flywheel.

Haha yours is great......I think your flywheel is stuffed hahahahaha. Would be a good project to get it looking good though, probably worth a bit cause its self propelled. Does it still run?

I know a little bit of smoke is fine. But this is a cloud of white smoke that completely surrounds me and the mower haha. Was weird though that the first time i ran it there was no abnormal smoke, just a little at idle. And as soon as the new condenser went in it just started spewing it out. Could be that i had the blade disc on then and it was dispersing the smoke. Or Maybe just a better spark burning more oil :huh:

If it was the seals would the smoke come out where the shaft is? Cause this is coming out of the muffler like its running rich. I'll try and get some new seals next weekend and see if its better. Do i need the boss off to fit them?

The photo is it the way it was when i got it off the mower. I guess gunk preserves stuff a bit hahah

Thanks
 

Attachments

  • 04012011475.jpg
    04012011475.jpg
    139.2 KB · Views: 6

sideways

Unfinished projects king.
Messages
1,501
Reaction score
2
Location
Perth, Western Australia
Yea I spent almost a day cleaning it. Was really surprised when it came out that good. Only one fin bent on it and none broken off the flywheel.

Haha yours is great......I think your flywheel is stuffed hahahahaha. Would be a good project to get it looking good though, probably worth a bit cause its self propelled. Does it still run?

I know a little bit of smoke is fine. But this is a cloud of white smoke that completely surrounds me and the mower haha. Was weird though that the first time i ran it there was no abnormal smoke, just a little at idle. And as soon as the new condenser went in it just started spewing it out. Could be that i had the blade disc on then and it was dispersing the smoke. Or Maybe just a better spark burning more oil :huh:

If it was the seals would the smoke come out where the shaft is? Cause this is coming out of the muffler like its running rich. I'll try and get some new seals next weekend and see if its better. Do i need the boss off to fit them?

The photo is it the way it was when i got it off the mower. I guess gunk preserves stuff a bit hahah

Thanks

Doesn't run, it's seized and full of rust and wasp nests. Absolutely stuffed. You can also see there is part of the case's broken off and there are fins snapped off the barrel, the axles have also mostly rusted away. I got it for the carby (metal float bowl G3) and the cool right angle drive that's built into the diff, they have a little plate clutch in them, it's a really cool set up and lasts forever.

What mixture did you have the oil? Was it proper 2 stroke oil or oil of a different kind?

No the smoke shouldn't come out where the shaft is if you've got bad seals (if it does your engine needs a rebuild). You will probably have to take the engine completely apart to get the seals out, you can try with just the boss and flywheel off but it'l be near impossible.

It's great when they're all gunked up, preserves them really well! :thumbsup:

Thanks

Hayden
 

jman231994

New member
Messages
724
Reaction score
3
Location
Australia
Haha that really is stuffed then.

Thats clutch sounds awesome. Gave me an idea for an rc car. Ive got an old self propelled mower sitting in my backyard. Some dodgy Solo thing made mostly out of plastic. Its where i got my carb from. I might see if i can get the clutch out of it for an rc car. Belt drive from a whipper snipper motor :thumbsup:

As far as i know its 25:1. My dad mixed it up for our last mower which he replaced. It was a powertorque engined victa so it wouldve been mixed to 25:1. Ive since got that mower running again and it runs fine with only a little smoke on the same fuel. Its quite old fuel though, probably 2 years old. Ive heard fuel will go off after 6 months or so. Could that be a contributing factor?

The oil is definitely 2 stroke oil. Its oil for a stihl whipper snipper. I read on a forum that stihl makes pretty good oil.

As for that 1/2" bsf tap. My friend said she has bought one for her build. Shes almost finished building a Victa bmx and needed the tap to re thread a bike peg so it would fit on the victa's shaft.

Thanks again
 
Status
Not open for further replies.
Top