Kleyny
New member
Looking at adding valve shims to up the stock pressure a little bit. Will this lift my revs up?
I'm getting valve float at 5000. Would love to get up around the 5500.
I'm not interest in 18lb ones as I'm only looking at 5500, once again due to me being in Australia I cant find heavy duty 10.8 here and the shipping is an absolute joke for a 2 valve springs from the states.
Any ideas on roughly how thick I can go with a stock GX200 before spring bind? Obviously I will be checking for binding but would like a good starting point.
Thanks
I'm getting valve float at 5000. Would love to get up around the 5500.
I'm not interest in 18lb ones as I'm only looking at 5500, once again due to me being in Australia I cant find heavy duty 10.8 here and the shipping is an absolute joke for a 2 valve springs from the states.
Any ideas on roughly how thick I can go with a stock GX200 before spring bind? Obviously I will be checking for binding but would like a good starting point.
Thanks
