Using headers/mufflers other then stock

Status
Not open for further replies.

Toad

New member
Messages
7
Reaction score
0
Hello, I am new to this site and a first for Karting, but my sons & I have a older Carter Brothers kart (so were told) that is stock, nothing fancy, but we have a lot of fun with it. It has a Greyhound (harbor Freight) 6.5 HP motor. My question is, we are using a open type air filter, and my son thinks it would be "neat" to have a header & muffler instead of the stock muffler. Any suggestions on using a header/muffler?, what brand?, etc. Or best to keep it stock? I don't want to harm motor, but the look and maybe some more sound would be nice.
Any help would be appreciated, thanks Todd.

Go Cart.jpg
 

r_chez_08

Should be in the shop...
Messages
4,827
Reaction score
14
Location
Cornwall, UK
You can get pre made headers/ mufflers from affordable go karts, nr racing and other places.
You can buy a straight pipe header and install either a briggs style can muffler on or a rlv mini muffler.
This will probably set you back between $30 and $50.
Alternatively, using a drill press and a cutting tool you can make an exhaust flange, then you could weld pipe of the correct diameter to the flange.
Straight pipes are bloody loud, i would reccomend getting a muffler.

You may want to rejet after the filter and header mods.
 

Toad

New member
Messages
7
Reaction score
0
Thank you BOTH for your posts, really appreciate it. I live in Des Moines Iowa, and for some reason we just don't have any kart dealers, so advise/info and parts are all online resources. Do I then understand it will not harm a stock motor by using aftermarket exhaust? Thanks again, Todd
 

DCProductions

Cockney Ragamuffin
Messages
496
Reaction score
0
Location
Louisiana, USA
Here's what I did for my 6.5:
This is a 3/4" electrical conduit 90° bend welded to the original exhaust flange (I cut the muffler off at the flange then ground it flat)
The muffler is a Briggs and Stratton screw on/off muffler that I got at my hardware store and adapted to the conduit via a 3/4" threaded conduit coupling




The benefit to this setup is not only the price, at about $8, but also the ability to have a straight pipe and a muffler (with fairly high flow) in one unit. I suggest bracing the header, by the way.
Hope this helps!
 

Toad

New member
Messages
7
Reaction score
0
Thank you! That is what I am looking for, plus I like the easy on/off of the muffler.
 

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
Oooh- Can I play, too?
 

Attachments

  • MufflerBrace1.jpg
    MufflerBrace1.jpg
    140.4 KB · Views: 20
  • cherrybomb3b.jpg
    cherrybomb3b.jpg
    55.9 KB · Views: 12
  • GX340b.JPG
    GX340b.JPG
    206.1 KB · Views: 15

mckutzy

Well-known member
Messages
8,353
Reaction score
113
Location
bc, canada
Here's mine, just a bike though. Made from found EMT conduit, didnt bend anything either. I found the bends. All you need is to grind the galv off before you weld, keep your head from the fumes anyways as there is galv inside the tubing.
Mine has a just a small baffle to make starting and running easier, it is kinda loud, sounds more like a full size motorcycle at idle. I used a hot oil finish to color it black.

 
Status
Not open for further replies.
Top