Useless Water Pump Engin

Status
Not open for further replies.

subydrew

drew
Messages
2
Reaction score
0
Location
arkansas
So I pick up a old Honda gx 120 with a water pump attachment. Once I got he pump off I found that the crank shaft has no key way for a clutch just threads for the pump turbine. Can't seem to find any oem parts or after market shafts. I really don't have any real plans for it but just trying to see if this engine in useable in the kartting and mini bike world
 

mckutzy

Well-known member
Messages
8,353
Reaction score
113
Location
bc, canada
Hello and welcome.
Those motors aren't really condusive to kart and minibikes... As you have seen, a tapered shaft...
A good choice talked about here, is a honda clone or preditor.. Have plenty of power and there are lots of mods... Basic and spendier ones..
 

subydrew

drew
Messages
2
Reaction score
0
Location
arkansas
Yeah I've got a manco Baja I rebuilt with a predator 212. Plus I've acquired a mini bike project and others engines. Just trying to see if there are any apps for this one
 

B_Bimmer

Member
Messages
200
Reaction score
1
I would buy a normal crank off ebay and throw it in. Yeah those predator engines are cheap, but Honda quality and consistency is still leagues beyond the cheapo's.
 
Status
Not open for further replies.
Top