Unknown 2 cycle engines

Status
Not open for further replies.

Zombient

Junkyard Derelict
Messages
565
Reaction score
7
Location
Waco, Texas
I'm picking up that Honda 4wheeler today from a guy in my neighborhood and I'm going to ask him if he'd be interested in selling his old 2 cycle engines. He's got at least 2 blocks and a box of parts. I highly doubt all the parts are there.

I just wanted to know if anyone here would be interested in them? I can't remember the name he said they were. Something like YZX200 or something.

They looked kinda like this? I remember the huge head fins.

 

itsid

Moderator
Staff member
Messages
11,563
Reaction score
261
Location
Ruhrpott [Germany]
that one's a iame; Komet K30 to be precise;

so xyz200... nahh I don't think so :D

100cc rotary valve (unfortunately) from mid 1980s;
as you can see.. installing a clutch is not an option for this type of engine ;)
that's the unfortunate part....

but if you're after a direct drive (push start) racing kart.. this is for sure a great engine
- if it has been cared for of course.

Anyways.. without posting pics of the actual engines in question (looks something like ... is NOT really helpful ;))
I doubt you'd get an answer.

'sid
 

Zombient

Junkyard Derelict
Messages
565
Reaction score
7
Location
Waco, Texas
Yep. One of those is the Komet K30. I think.









So, anyone know the background on these? And please excuse my messy bathroom, it's where I work on a lot of things :)
 

itsid

Moderator
Staff member
Messages
11,563
Reaction score
261
Location
Ruhrpott [Germany]
Well nope that's not a K30..

that's the K30 cylinder and head on a Komet K78 crankcase (1970's)
[at least that's what I think that crankcase is]

and to make it fit the fins have been cut off...

In case someone needs that case (I doubt it...) he might pay you 30-50 bucks
(either for a checked crankcase, or an unchecked engine)
since that thing won't run anyways... that's the best I'd assume you'd get.

The other one though... that's a Yamaha KT100 as far as I can tell in original but incoplete condition..
Personally.. I'd service that engine (completely..!! soda blasting first to reveal all cracks and dents!)
if there's no major issue with that a full service might cost you ~200-300 bucks max (including the missing ignition)
and you could sell it afterwards for something between 750 and a full K depending on how it turns out, and how well you document the maintenance procedure
(pics help selling this thing.. BEFORE and after pics recommended)

So, yeah, that's a good grab :D

'sid
 

Zombient

Junkyard Derelict
Messages
565
Reaction score
7
Location
Waco, Texas
I might just sell them as is. I have noooo idea how to work on these. I'll post them up on the "for sale" area later :)

Not bad for $20.
 

itsid

Moderator
Staff member
Messages
11,563
Reaction score
261
Location
Ruhrpott [Germany]
as is... good luck.
but frankly: not a good idea!

as it sits.. 100 bucks for the kt100 if you're lucky (since no one knos what's inside)
and on ebay/craigslist etc.. that might include shipping.
cleaned a bit.. maybe more

example of what you have now:
http://www.ebay.com/itm/Yamaha-KT100-/141832670091?hash=item2105e2cb8b:g:fIUAAOSwhcJWMAUg&vxp=mtr

example of what you could sell with some effort:
http://www.ebay.com/itm/YAMAHA-KT10...ash=item280bb99370:g:5kYAAOSwLVZV1A-c&vxp=mtr
(okay drop 120 for the clutch... still...)

just saying...

'sid
 

Zombient

Junkyard Derelict
Messages
565
Reaction score
7
Location
Waco, Texas
Huh. I do actually have some of those parts. I'll break it all out tomorrow and see what I can do. Thank you so much Sid, I really do appreciate it.
 
Status
Not open for further replies.
Top