Two Seat Yerf Dog Won't Start

Status
Not open for further replies.

Nodroz

New member
Messages
1,071
Reaction score
1
Location
Belgium (Europe)
Could you please tell us what the problem is? What did you do to get it started? What type of engine is it? Brand? Serial number? Give us some more information man. With this we can do nothing.
 

Doc Sprocket

*********
Messages
15,677
Reaction score
151
Location
Ontario, Canada
Welcome to the forum. As a mechanic (what kind of mechanic are you?), you can reasonably expect to apply the same principles to this engine as to any other internal combustion engine. Where are you in the troubleshooting process?
 

OzFab

Well-known member
Messages
15,615
Reaction score
69
Location
Warwick Qld, Australia
No Chris, He's saying he took it to a mechanic who couldn't get it going.

Provide the info asked for by Nodroz, some pics may help too.

There are three things needed to make an engine run; fuel, compression & ignition. First thing to do is check for spark & compression
 

Raizor3203

New member
Messages
47
Reaction score
0
I agree with this guy ^^^^

A mechanic that can't get a go-kart started? Make sure he doesn't work on your car.
 

Doc Sprocket

*********
Messages
15,677
Reaction score
151
Location
Ontario, Canada
Amen! Again, all the same basic principles apply.

So- drag it home if you haven't already, Give us a pic or two, and let's get you running! The likelihood lies either in the carb being gummed up, or the spark plug.

Hey Fab- You Forgot AIR! At stoich, that's 14.7 important parts!!!
 

Doc Sprocket

*********
Messages
15,677
Reaction score
151
Location
Ontario, Canada
Borrowed from cdxetextbook.com:

"The term Stoichiometric ratio describes the chemically correct air-fuel ratio necessary to achieve complete combustion of the fuel. It is represented by the Greek letter, lambda. For gasoline fuel, or petrol, the value of the ratio is 14.7 parts of air, to 1 part of fuel. By mass, that's 14.7 kilograms or pounds of air to each kilogram or pound of fuel. So if lambda equals 1, the air-fuel mixture is at the Stoichiometric ratio, of 14.7 to 1."
 

OzFab

Well-known member
Messages
15,615
Reaction score
69
Location
Warwick Qld, Australia
Borrowed from cdxetextbook.com:

"The term Stoichiometric ratio describes the chemically correct air-fuel ratio necessary to achieve complete combustion of the fuel. It is represented by the Greek letter, lambda. For gasoline fuel, or petrol, the value of the ratio is 14.7 parts of air, to 1 part of fuel. By mass, that's 14.7 kilograms or pounds of air to each kilogram or pound of fuel. So if lambda equals 1, the air-fuel mixture is at the Stoichiometric ratio, of 14.7 to 1."

Oh, thaat. Again, technicalities :roflol:
 

Nodroz

New member
Messages
1,071
Reaction score
1
Location
Belgium (Europe)
Borrowed from cdxetextbook.com:

"The term Stoichiometric ratio describes the chemically correct air-fuel ratio necessary to achieve complete combustion of the fuel. It is represented by the Greek letter, lambda. For gasoline fuel, or petrol, the value of the ratio is 14.7 parts of air, to 1 part of fuel. By mass, that's 14.7 kilograms or pounds of air to each kilogram or pound of fuel. So if lambda equals 1, the air-fuel mixture is at the Stoichiometric ratio, of 14.7 to 1."

I learned this at school! I never know this would become in handy in real life, lool. :wai:

Waiting for the OP to answer our questions. ;)
 
Status
Not open for further replies.
Top