Two Engine Questions.

Status
Not open for further replies.

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
Kerosene and diesel are basically the same thing. I'll agree with Russ about the transmission fluid. It is formulated to remove crud.

The best tool to tap out a piston is a piece of wood and a big hammer. Use a large piece of wood, small enough to fit into the cylinder, but big enough to spread the force around the piston.


:iagree: And, if the wood is more rectangular than square, I'd line up the long side of the wood with the wrist pin while tapping, in an effort to avoid cocking the piston in the bore.
 

B.M.800

TheBeal.
Messages
2,387
Reaction score
26
Location
Central PA
So, we have no trans fluid or diesel... kerosene will work, how long should I leave it soak in? I only put enough to puddle up around the valves and spread some around the piston. That fine?

Something else, say I get this engine running and another 5hp B&S... Would both of those together be enough to out do my Honda 6.5?
 
Status
Not open for further replies.
Top