Turbo bonanza mini bike 212cc

[baxter]

Does anybody know the stock exhaust gpm on a 212cc predator

 

[mckutzy]

Your going to have to explain a little more about what the acronym "GPM" means in relation to an exhaust system?

 

[ezcome-ezgo]

A stock exhaust on a 212cc predator has 8 gpm. Also, sandwich.

Here's a picture of a tractor:

 

[bob58o]

Gallons per minute?

225 gallons per minute.

I have no idea?

 

[Flyinhillbilly]

I've researched turbocharging a 212. I think the RB13 was the closest thing I could find that might work (just going from memory here). I've heard about smart car turbos working, but I can't find the A/R spec on the hotside.

 

[mckutzy]

OK so back to the OP.... what does he mean by " the stock exhaust gpm on a 212cc predator"?

 

[Flyinhillbilly]

Gallons per minute, I usually go off of lbs/min.

 

[Jfive]

gasfumes per minute

 

[Flyinhillbilly]

Gofasts per minute

I think he's calculating the exhaust flow and referencing a turbo map. I hope this happens.

 

[mckutzy]

Heard of CFM in relation to turbo's capacity so to speak... not GPM????

 

[Jfive]

Most just go by displacement of the engine.

 

[chancer]

Abrahms Tank? Gallons Per Mile.

 

[bob58o]

I was guessing gallons of air, not fuel.

Guess probably not close either way.

 

[ezcome-ezgo]

Googles per minecraft?
Geese per moose?
Gloves per manhand?
Graves per mortuary?
Guadalajaras per Mexican?

 

[bob58o]

Googles per minecraft?
Geese per moose?
Gloves per manhand?
Graves per mortuary?
Guadalajaras per Mexican?

If it were GPS of the stock exhaust, I would say activate the Locate my iXHaust App.

 

[baxter]

I was trying to figure out the gallons per minute so I could find a turbo that the engine can make the turbo actually do it's job

 

[mckutzy]

Are you thinking of perhaps CFM? ... That I know is typically used in measurement of airflow in turbo's.

 

[baxter]

Most likely, I thought it was measured in gpm

 

[bob58o]

The stock hemi head flows like 50-55 cubic feet of air per minute of time.
393 gallons per minute.

Best I could do.
http://karting.4cycle.com/archive/index.php?t-55846.html

 

[Flyinhillbilly]

Are you thinking of perhaps CFM? ... That I know is typically used in measurement of airflow in turbo's.

Cfm is a measure of displacement of volume over time, so is gallons per minute, lbs/ min, of even molecules per minute. It's all doing the same thing, just a different reference of measurement.