Tricky Question: Why wont my engine start?

Status
Not open for further replies.

Ryafor

New member
Messages
383
Reaction score
2
Location
Ontario, Canada
You've got a Predator right? Bring it back to HF. LOL That's what i did for real. But mine was in 90 days.

Hopefully they're nothing like Walmart. I bought one of those fry cutters from there. Clearly it was a return cause blades were bent and missing and there were old potato skins in the blades that were there
 

bob58o

SuckSqueezeBangBlow
Messages
9,646
Reaction score
1,866
Location
Chicago-town USA
Hopefully they're nothing like Walmart. I bought one of those fry cutters from there. Clearly it was a return cause blades were bent and missing and there were old potato skins in the blades that were there

Next time I buy and return an engine from HF I will steal as many parts as I can like gaskets, connecting rod, piston, valves.... LOL

I have no idea sir??? It won't start.... How dare you sell this junk here. LOL
 

Jrgunn5150

Rudderless
Messages
1,028
Reaction score
12
Next time I buy and return an engine from HF I will steal as many parts as I can like gaskets, connecting rod, piston, valves.... LOL

I have no idea sir??? It won't start.... How dare you sell this junk here. LOL

I'd be so pissed if I bought it, I live an hour from HF lol.
 

Ryafor

New member
Messages
383
Reaction score
2
Location
Ontario, Canada
Next time I buy and return an engine from HF I will steal as many parts as I can like gaskets, connecting rod, piston, valves.... LOL

I have no idea sir??? It won't start.... How dare you sell this junk here. LOL

Lol I return cap to Walmart all the time tho after I break it
 

FreeRunner15

=======
Messages
660
Reaction score
10
Location
================
Next time I buy and return an engine from HF I will steal as many parts as I can like gaskets, connecting rod, piston, valves.... LOL

I have no idea sir??? It won't start.... How dare you sell this junk here. LOL

lol so funny but so wrong.

but im going to keep it. so far i just think the air fuel ratio needs to be balanced (hopefully) .

by the time that happens i will have a good amount of gained horsepower and torque from it but shooooot i already have gains from the little i already drilled. and if i completely mess up i have another jet and emulsion tube.

but if everything goes right, i have another carburetor to add on :)

i wonder if the engine could handle 2 high performance carbs.
 
Last edited:

KartFab

Active member
Messages
3,381
Reaction score
60
Location
Dallas, TX
ha, i know what you mean.

But in my thread i posted an attempted burnout all while the kart moves the lawn mower in the process if you havent looked there yet.

That was after i installed a drilled jet..a .03125 to be precise. still needs to be drilled bigger.
That bigger jet let me be able to use the choke but still dies. So i believe fuel flow is the problem. and thats with the stock muffler on.

So two more problems (besides valve lash)
1) incorrect jet size - predators use a .028, and with intake/exhaust you need to be at .036 or .037 (unless at high altitude, but I doubt that will be a problem in TX)
2) you have a high flow intake, but your exhaust is restricting flow out. Even if you put all the right stuff in the intake, you still are only halfway to the point where you need to be with flow. Putting on a high flow intake and rejetting does little good if you keep the stock muffler on.
 
Status
Not open for further replies.
Top