Torque numbers rod bolts

[Bansil]

@BrownStainRacing

Do you or anyone have a good chart?

Do we torque these guys wet or dry? Stock rod v/s aftermarket Rod?

Couldn't find it searching

 

[BSR#2]

@BrownStainRacing

Do you or anyone have a good charity?

Do we torque these guys wet or dry? Stock rod v/s aftermarket Rod?

Couldn't find it searching

It's me, my other phone went black screen the other day.

Stock rods, I use oil and torque to spec. I'll sent you those in a bit.

After market rods are different, with assembly lube and oil. Brb

 

[BSR#2]

@BrownStainRacing

Do you or anyone have a good charity?

Do we torque these guys wet or dry? Stock rod v/s aftermarket Rod?

Couldn't find it searching

Here ya go.
This is what I use for every small block clone type OHV engine.

After market rods NEED to be torqued to manufactures spec, they differ.

Box Stock Project 196cc Engine and Torque Specifications

Type: 4 Stroke OHV single cylinderDisplacement: 196cc (12ci)Bore and stroke: 68mm x 54mmCompression ratio: 8.5:1Oil capacity: 14-16oz full synthetic (racing applications)Clearances and DimensionsPiston to cylinder wall: .0035-.0045"Piston ring end gap: .008-.012"Crankshaft pin diameter...

www.arcracing.com

 

[Bansil]

Here ya go.
This is what I use for every small block clone type OHV engine.

After market rods NEED to be torqued to manufactures spec, they differ.

Box Stock Project 196cc Engine and Torque Specifications

Type: 4 Stroke OHV single cylinderDisplacement: 196cc (12ci)Bore and stroke: 68mm x 54mmCompression ratio: 8.5:1Oil capacity: 14-16oz full synthetic (racing applications)Clearances and DimensionsPiston to cylinder wall: .0035-.0045"Piston ring end gap: .008-.012"Crankshaft pin diameter...

www.arcracing.com

Thanks. Now searchable.