Torque converter problem?

Status
Not open for further replies.

Invader2000

New member
Messages
2
Reaction score
0
I have a go kart with a 212cc predator and tav2 torque converter. The belt on the torque converter went out, and I got a new one, thinking it was just a routine replacement. (Yes, I was very careful to get the correct belt so I know that's not the problem.) It accelerates like normal until about 10mph and then it won't go any faster, and the belt gets very hot. (I've already torn up two more belts while trying to fix the problem.) I took the torque converter apart and discovered that one spring on the driver was broken so I replaced it, but I still have the same problem. The torque converter seems to be in good shape so the problem could be somewhere else. Any ideas?
 

Joe-405

Enjoying New Projects
Messages
2,673
Reaction score
98
Location
U.S.A.
The belt on the correct way ? There is a wrong way and a correct way.
 

Invader2000

New member
Messages
2
Reaction score
0
The flat side of the driver is against the engine so shouldn't the flat side of the belt also face the engine?
 

Bbqjoe

Banned
Messages
3,455
Reaction score
70
Location
Location, Location
I have a go kart with a 212cc predator and tav2 torque converter. The belt on the torque converter went out, and I got a new one, thinking it was just a routine replacement. (Yes, I was very careful to get the correct belt so I know that's not the problem.) It accelerates like normal until about 10mph and then it won't go any faster, and the belt gets very hot. (I've already torn up two more belts while trying to fix the problem.) I took the torque converter apart and discovered that one spring on the driver was broken so I replaced it, but I still have the same problem. The torque converter seems to be in good shape so the problem could be somewhere else. Any ideas?
Please refer to rule #1.
 

Joe-405

Enjoying New Projects
Messages
2,673
Reaction score
98
Location
U.S.A.
Post pics please. And that's rule #1. Some people don't explain things around these parts.
 
Status
Not open for further replies.
Top