torque converter help

[JH Pinoy]

Once I bolt the torque converter plate (yellow in pic) to the engine, do I need to somehow bolt the jackshaft (red) down too to keep it from moving freely? Or just leave it alone so that the only thing keeping the converter from moving are the bolts (yellow) behind the torque converter driver? I hope somebody somewhat understands what I mean.

 

[r_chez_08]

It is just the bolts behind the driver.

 

[redsox985]

Yup, just tighten it down the 4 bolts that go into the block and you're done.