Torque Converter Driven Pulley Opens Up Instantly

Status
Not open for further replies.

JonathanE

New member
Messages
7
Reaction score
0
Well i just bought a go kart already running with a racing seat and shocks and everthing with almost no rust for $80 the only thing wrong with it that i could see was it needed 2 front tires so i put some extras that i had on there, however, now something is wrong with the torque converter, as soon as i throttle it will move about a foot and then the driven pulley will open up as wide as it can and catch the belt and make the gear ratio way to low, so that the driver is spinning as fast as the motor will let it, but wont turn the belt because of the driven pulley opening up instantly, Is there anyone that can help me with this?
 

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
I'm wondering if the driven was re-assembled wrong at some point, fouling up the spring tension, or maybe the spring is shot? The large spring in there is what decides when the driven opens, and if it basically flies open instantly, it makes me think the tension is way too low.

What model CVT is it?
 
Status
Not open for further replies.
Top