Throttle stop

[roadie114]

Need some ideas on installing a removal throttle stop so my daughter can learn how to drive her go kart at a slower, safer pace. I have just a standard handlebar mounted "brake lever" type throttle. Any thoughts? It's for the 52cc Scooterx Power Kart. Thx!!

 

[oscaryu1]

If you drive slower, you burn the clutch up faster... (Unless it's quite a bit above the engaging speed)...

You could re-gear it...

 

[roadie114]

If you drive slower, you burn the clutch up faster... (Unless it's quite a bit above the engaging speed)...

You could re-gear it...

Well, at $15 for a new clutch I'll risk it

Just looking for a temporary removal solution until she feels comfortable with it.

 

[Pa and Corby]

try a bolt and nut on the motor end of the throttle cable! simple and cheap

 

[2or3wheels]

just tell her not to pull it all the way.

 

[RobertD]

where the butterfly is on the carb, you could attach some kind of limiter on the "open" side, vs the limiter that's on the closed side (used for the idle adjust).