The small engine nitrous trend

[Flyinhillbilly]

IMO, people are going to do this regardless. It's not a trend for nothing. If a youtuber could figure out how to make it work, and work right, then I think it would be huge.

 

[chancer]

There you Go! This is would be Huge for OCDs YouTube channel.

 

[bob58o]

Cheap option for a Fuel Solenoid.
If you can trust that it will open when you turn on the nitrous.
12V DC 1/4" Electric Solenoid Valve N/C for Water Air Gas Diesel 2-Way/Position
http://www.ebay.com/itm/12V-DC-1-4-...d=100338&rk=1&rkt=28&mehot=pp&sd=390746702286

Electric
12V
Normally Closed
1/4" NPT
Up to 1.0Mpa (145 psi)

 

[outcrydrummer]

Hmmm let me consider a few reliable cheap options and see what shakes out.
IMO it needs to be something you dont need any electric signal for....keeps it simple.
I wonder if its possible to have the nitrous flow over a fuel and venturi fuel out of it through a predetermined jer size........

 

[Flyinhillbilly]

Maybe something like this?
I was also wondering if you get liquid nitrous if you invert the canister?

 

[outcrydrummer]

Maybe something like this?
I was also wondering if you get liquid nitrous if you invert the canister?

It wouldn't prevent it from turning to a gas even if the bottle was flipped.....and if it's a real nitrous bottle the pickup is on the bottom like 1/8" so flipping it would be pointless.

 

[bob58o]

Challenge Accepted.
5% becomes 95% when you only run for 9 seconds at a time.

---------- Post added at 01:41 AM ---------- Previous post was at 01:27 AM ----------

Shake down!!!!!!
5:50 why nitrous!
https://www.youtube.com/watch?v=c28O1db6LyQ

 

[chancer]

Those bikes are Fast! but you could do without the first 3min of that Vid.

 

[Kentucky Boy]

The airbrush I mentioned earlier works just like the diagram above. You could even adjust the amount of fuel it picks up.

 

[Kentucky Boy]

Airbrush.

 

[Pickle]

I don't know what kits you're speaking of but the cheesy little nitrous kits I've seen for small engines are a joke. The real power gains are so negligible it's not worth your time. Leave the nitrous for cars. A guy could buy a used bottle, a few AN fittings, and a braided hose for pretty cheap. Just use it as decoration. Would look pretty cool with minimal effort.

 

[Gears]

I don't know what kits you're speaking of but the cheesy little nitrous kits I've seen for small engines are a joke. The real power gains are so negligible it's not worth your time. Leave the nitrous for cars. A guy could buy a used bottle, a few AN fittings, and a braided hose for pretty cheap. Just use it as decoration. Would look pretty cool with minimal effort.

Or fill it with nitrous and blow it down the Carb

Sent from my SAMSUNG-SM-G930A using Tapatalk

 

[Bier84]

I ran a 6 sigma kit on my manco with predator and wasn't crazy fast but it did make a diffrence. I had to run it borderline rich just to get a gain.........added a Pvc bottle with dip tube and a nozzle with hops c9 race gas to give it a shot of fuel with nitrous and it made a diffrence in power. I sold the kart and it still has the same motor , running strong .