The Holy Grail for Vertical Engine Fans!

Status
Not open for further replies.

Jerryburger

Admiral Annoy
Messages
1,104
Reaction score
5
Location
The Nation's Catbox...er, AZ.
Hi! Boy did I luck out on this. It's torque converter driver unit with a 7/8" shaft opening! Now I HAVE to do something with my B/S 2 stroke!


Here's the info.... Eberhardt-Denver Co. Power-Flow Transmission.
 

kibble

I banned myself
Messages
2,766
Reaction score
1
Ah, I see. I would get one of those but the price is a bit too steep for me. Would fit right onto my engine and would avoid the jackshaft-clutch set up.
 

Jerryburger

Admiral Annoy
Messages
1,104
Reaction score
5
Location
The Nation's Catbox...er, AZ.
I saw those a while ago too, Russ..... I'm not sure how much a local shop would charge to bore a 3/4" clutch out to 7/8", but that thought had crossed my mind. In my case, I had some dumb luck on my side. I tried to look up Eberhardt Denver to see if they were still making these, but I'm hitting dead ends.
 
Status
Not open for further replies.
Top