dragos28
Trouble Maker
Beautiful granddaughters and awesome build!
thanks for sharing the bigger pictures!
thanks for sharing the bigger pictures!
The Granddaughters Ranch Kart!
- Thread starter Clifford
- Start date
- Status
Clifford
Custom Fabricator
Steering is nothing fancy. I had some 12 mm Shifter Rod Ends from an Isuzu NPR transmission that made perfect Kart Rod ends. The steering is adjustable just like an automobile!
We changed out the roll bar padding last month and I am holding it in place temporarily with painter tape. Gotta get more zip ties before Spring.
We changed out the roll bar padding last month and I am holding it in place temporarily with painter tape. Gotta get more zip ties before Spring.
Attachments
-
20140114_162117_resized.jpg -
20140114_162126_resized.jpg
Clifford
Custom Fabricator
I guess I should Powder Coat those steering rods to make them look better!
And I've been kicking the idea of putting in a new axle with a differential to give the Grandsons two wheel drive for when they get big enough to drive it. Maybe gear it up a little more too!
Also, I have the threading die for rethreading shortened axles should anyone need an axle cut down and remade. They usually have extra long keyway slots so axles can be cut down some to get them the width you need.
And I've been kicking the idea of putting in a new axle with a differential to give the Grandsons two wheel drive for when they get big enough to drive it. Maybe gear it up a little more too!
Also, I have the threading die for rethreading shortened axles should anyone need an axle cut down and remade. They usually have extra long keyway slots so axles can be cut down some to get them the width you need.
qtband
Well-known member
For your chain tensioner, does the pulley show much wear, since it's plastic?
- Status