Tecumseh OHH60 carb upgrade

Status
Not open for further replies.

Whitetrashrocker

Inmate #952016
Messages
5,240
Reaction score
4,744
Location
Southern New Mexico
A 90° gas inlet sounds like it's just the barb they put on it. Some are straight and some are 90° for shroud clearance. Not a big deal either way in my opinion.
 

BeaterofAincrad

2018 Build-Off Contestant
Messages
232
Reaction score
5
Location
Vermont
I just couldn’t find a HS40 carb with a straight inlet and I’d like to save money. I found that other carb but idk if it will work with the engine or not, it’s not listed but sometimes you can use a different carb on an engine.
 

Xtreme Yard Karts

New member
Messages
188
Reaction score
10
Location
Sweet Home Alabama!
That carb will work, but it has a bigger Venturi inside and work best if you had a high flow air filter, header, better valve springs, etc. the HS40 carb is better for stock OHH, but that carb will work.

Either is an upgrade over the stock non adjustable carb.
 

BeaterofAincrad

2018 Build-Off Contestant
Messages
232
Reaction score
5
Location
Vermont
Thanks, I’m considering getting the HS40 and then machining a straight inlet. I’m not sure yet though.
 
Status
Not open for further replies.
Top