We bought a kart this weekend with a Techumseh 9.0, model number H90. The engine and kart are in decent condition and is running. However, after a half day of riding, the engine started backfiring when letting off the pedal and then starts to surge/sputter randomly. The PO said the kart sat for about 3 years so he replaced the carb and said the governor linkage needed some tweeking. I know recognize that the linkage is a homebrew (odd springs/pieces) and is most likely not original.
My first question is regarding the running rich condition. When shut off, I can see fuel leaking from the carb/filter. I also see black soot on the muffler. On the carb I don't see any mixture adjustments. Are there screws on this model?
What is a good rule of thumb for adjusting the governor and throttle linkage?
Thanks,
Aaron
My first question is regarding the running rich condition. When shut off, I can see fuel leaking from the carb/filter. I also see black soot on the muffler. On the carb I don't see any mixture adjustments. Are there screws on this model?
What is a good rule of thumb for adjusting the governor and throttle linkage?
Thanks,
Aaron