tecumseh carbon on plug

Status
Not open for further replies.

kendelrk

redneck engineer
Messages
2,425
Reaction score
9
Location
westland michigan
well working with my kart today, i found i need new front tires, but my big concern is the engine, after at least 5 minutes of running,the spark plug is full of carbon, and after cleaning is okay for another five, and with any adjusting of the carb, it either dosent run or i have to hold the gas to keep it running, it chugs white smoke, and if i press the gas all the way down, itll bog down but if i give it only a little it takes off, can anyone tell me whats wrong?
 

Russ2251

AZUSA:Powered by LAWN-BOY
Messages
6,622
Reaction score
47
Location
Huntington Station, Long Island, NY
Carbon buildup indicates a rich mixture and/or oil consumption.
White smoke indicates oil consumption.
My instincts tell me high speed circuit is lean (?).
After engine is warmed up and you floor (and hold) the pedal, will it stall out completely requiring a restart?...or does it just run like crap?
 

kendelrk

redneck engineer
Messages
2,425
Reaction score
9
Location
westland michigan
it runs pretty alright, its not smooth tho, its pretty rough at idle, and if i floor and hold the pedal, which pushes the throttle on the carb all the way it stalls requring a restart, such as in this vid, you can see it restart fairly every time, but when i press the pedal all the way in, it dies out , sorry about the poor lighting, http://www.youtube.com/watch?v=FCM9uvwR1ik
 

Russ2251

AZUSA:Powered by LAWN-BOY
Messages
6,622
Reaction score
47
Location
Huntington Station, Long Island, NY
Model number locations:
 

kendelrk

redneck engineer
Messages
2,425
Reaction score
9
Location
westland michigan
not on top, thought it would be on the bottom of the flywheel housing, but its been painted silver, and heres the left side and the top just for the sake of it, sorry if it came out bad
 

Attachments

  • 102_0052.jpg
    102_0052.jpg
    61.2 KB · Views: 10
  • 102_0056.jpg
    102_0056.jpg
    60.8 KB · Views: 9

kendelrk

redneck engineer
Messages
2,425
Reaction score
9
Location
westland michigan
if thats the high spped adjustment screw then what is this the one on the side of the carb, theres the idle screw, one below that, and the one at the bottom of the bowl, and ive tried well running, but it always seems to not restart, after i turn the kill switch,and 1/4 in or out?i have to wait till tommarow, and i think the engine is 5 hp but i cant tell
 

Russ2251

AZUSA:Powered by LAWN-BOY
Messages
6,622
Reaction score
47
Location
Huntington Station, Long Island, NY
Look very, very carefully for engine number. Possible it was painted over, but it is there.
It is stamped into shroud in at least one of the areas indicated in post #8.
I have never seen a Tecumseh without this number. If you just glance over it you will miss it. Scrutinize.
 
Status
Not open for further replies.
Top