Tecumseh AH82?

Status
Not open for further replies.

nickzom

New member
Messages
69
Reaction score
0
Location
latrobe, pennsylvania
whats the deal with these? i have one vertical one, and one with a clutch and mounting plate for go kart or mini bike. both have Tillotson HL66A carbs.

what does anyone know about these?
 

Russ2251

AZUSA:Powered by LAWN-BOY
Messages
6,622
Reaction score
41
Location
Huntington Station, Long Island, NY
If I knew for a fact that they were in pristine condition, I would make an offer.
Got ripped off pretty bad last time I purchased one.
Turned out there was a hairline crack in crankcase which made it worthless.
 

nickzom

New member
Messages
69
Reaction score
0
Location
latrobe, pennsylvania
well, i will tell you, one is missing the on off switch, both need air filters. both have good compression and run. i dont see any cracks. i can get pictures if wanted.
 

nickzom

New member
Messages
69
Reaction score
0
Location
latrobe, pennsylvania
fine with me. if you do, I have buckets of parts off old engines, and gas tanks off old engines, and 2 lawnboy engines as well. you could look through em
 

Russ2251

AZUSA:Powered by LAWN-BOY
Messages
6,622
Reaction score
41
Location
Huntington Station, Long Island, NY
I just need to be sure of what I'm getting into. Burned pistons, scored cylinder walls ,etc.
Hopefully these haven't been taken apart/re-assembled or otherwise molested.
Do you know anything of their history?
 

nickzom

New member
Messages
69
Reaction score
0
Location
latrobe, pennsylvania
they have both been run a decent amount, compression is fine. cylinders look good from what I can see. the kart one is very nice. the non mount one has had the crankshaft ground on a little bit and the crank case has been ground on by the three mount bolts. nothing serious. they have never been apart other than me pulling the carbs off to clean them.

they look like they haven't been touched in years.
 

Russ2251

AZUSA:Powered by LAWN-BOY
Messages
6,622
Reaction score
41
Location
Huntington Station, Long Island, NY
the non mount one has had the crankshaft ground on a little bit and the crank case has been ground on by the three mount bolts.
Need pics of this.
Please supply as many views as possible. Ultimately, I don't want to waste your time or mine. Pics will tell me if trip is worth it. 7 hours travel IIRC.
Thanx...:cheers2::thumbsup:
 
Status
Not open for further replies.
Top