Tecumseh 3.5HP

Status
Not open for further replies.

fukugmo

Newbie
Messages
9
Reaction score
0
Location
West Chester PA
I just purchased my first kart and looking to modify engine for max power as much as possible. Its a Tecumseh 3.5HP Power Sport H35. I know the quickest way is to adjust the Governor. Any advice or guidance on how?

Any other suggestions for maxing power without destroying the engine right away?

Also, there are no dip sticks in either oil fill. I found the manual online and not having a dipstick, it says to "add oil to overflow point, making sure to avoid spilling". In another section of the manual, its says to not overfill the oil.....very confused. How do you tell the overflow point?

I am starting here with no kart or small engine experience. Thanks in advance!
 

fukugmo

Newbie
Messages
9
Reaction score
0
Location
West Chester PA
Makes sense on threads yes, manual says "oil sump capacity is 21 oz or 1 1/4 US pints (.61 liters). There are 2 oil fill plugs.....do both fills feed same reservoir or separate reservoirs hence your suggestion for double whats listed?
 

Rail rider

Inmate # 3192016
Messages
792
Reaction score
6
Location
Planet earth ( the flat one)
See :surrender: ..I was giving you for the 212 .:oops: : But, I see, i got you to read the manual. :wai: :thumbsup::lolgoku: yes both caps fill the sump.

---------- Post added at 10:45 PM ---------- Previous post was at 10:39 PM ----------

As I see you have No experience what so ever in small engines I'll recommend we for go the gov REMOVAL.
 

fukugmo

Newbie
Messages
9
Reaction score
0
Location
West Chester PA
completely clueless but eager to learn and ok with getting beat up a little in the process. No one can be that clueless, right? Yes...., here I am! Transparent with my rookie knowledge

Thanks for your insight, patience, tolerance and humor!
 

mckutzy

Well-known member
Messages
8,353
Reaction score
113
Location
bc, canada
On to your main question about modding your motor...
There's not that much comparitivly speaking, as to a HF 212.
With those there is a ton of parts and already lots of knowledge about them...
Typically speaking, there about $100 or less.
 

Poboy kartman

Senior Moments Member
Messages
12,461
Reaction score
73
Location
White Settlement Texas
See :surrender: ..I was giving you for the 212 .:oops: : But, I see, i got you to read the manual. :wai: :thumbsup::lolgoku: yes both caps fill the sump.

---------- Post added at 10:45 PM ---------- Previous post was at 10:39 PM ----------

As I see you have No experience what so ever in small engines I'll recommend we for go the gov REMOVAL.


Then you should not be dishing out advice!!!!

Most of us here know what we're talking about.. We may joke around, but we try to keep the info top-notch.

The obvious has not been stated ( or I missed it) just get a HF Predator) almost double the hp , plenty of performance parts and information here.
 

karl

Well-known member
Messages
2,449
Reaction score
719
Location
North east Ohio
The tecumseh is alot cooler then a harbor freight motor, but if you want preformance you cant beat almost twice the horsepower for 99 bucks. Sell the h35 for $50 and your halfway there.

Poboy beat me to it oh well
 

Rail rider

Inmate # 3192016
Messages
792
Reaction score
6
Location
Planet earth ( the flat one)
Then you should not be dishing out advice!!!!

Most of us here know what we're talking about.. We may joke around, but we try to keep the info top-notch.

The obvious has not been stated ( or I missed it) just get a HF Predator) almost double the hp , plenty of performance parts and information here.
It was a :sifone: moment .but, I liked the idea of tipping it on its side and packing it full...:lolgoku: case and point. I got him to crack open that Manuel... That's what I was :2guns: for.
 
Status
Not open for further replies.
Top