tav2 driver clunking?

Status
Not open for further replies.

Swabbster

New member
Messages
439
Reaction score
0
i bought a tav2 replacement (knockoff) from bmi karts on sale, it worked great for about 15 hours, now it has started to clunk, i took it off cleaned it and re lubed it, and bought a longer crank bolt so it would screw into the crank more so i can torque it down real good, and i fired it up again and still clunking, i think it is the movable face that is making the noise, i used my finder to pull and push on the plate and it does have some play, maybe a mm of movement? do i need to replace the driver?
 

spyder1968

New member
Messages
285
Reaction score
1
Location
New Bedford, MA
have you tried adjusting the tension spring to a different position? if i recall correctly there are 3 adjustments (holes) and usually they come factory preset in the middle hole.
 

r_chez_08

Should be in the shop...
Messages
4,827
Reaction score
14
Location
Cornwall, UK
have you tried adjusting the tension spring to a different position? if i recall correctly there are 3 adjustments (holes) and usually they come factory preset in the middle hole.

Driver, not driven, is the issue.
I will leave Blaz to this one, he is the man in the know with TC's.
 
Status
Not open for further replies.
Top