TAV2 Driven Unit Nut

Status
Not open for further replies.

rwade

New member
Messages
1
Reaction score
0
Good afternoon,
I just purchased and installed a TAV2 on my Predator motor. When inspecting it, I noticed that I can unscrew the jam nut on the driven unit with my hand. How tight should this nut be? I can't find any info on this, only the torque for the shaft bolt.


Thanks

Ryan
 

cavfire

Member
Messages
110
Reaction score
1
Location
auburn, georgia
Should be a nylon lock nut and is considered a one time use fastener. Of course we've all used them more than once! I honestly just use a 1/2" ratchet while holding the driven with torque being dependent solely on how tight I can grip the driven. Never had a problem with loosening up while using a nylon lock nut in good shape.
 
Status
Not open for further replies.
Top