Suzuki Tranny case.

Status
Not open for further replies.

Jake.B

New member
Messages
495
Reaction score
0
Location
California-USA
I have an old suzuki enduro bike im restoring,
But i cant get the right side of the tranny case to come off. I have removed all the screws and double checked to make sure i have. Im guessing its stuck to the gasket. It probably hasent been opened in 38 years. What do you guys suggest to get it off with?
 

r97

Measure twice cut once
Messages
3,793
Reaction score
9
Location
Massachusetts, USA
Is there anywhere on the case you could tap it with a hammer (a block of wood in between hammer and case of course) to help nudge the cover off? Be patient and it will come off eventually.
 

fowler

New member
Messages
5,463
Reaction score
18
Location
Bullsbrook West Aus
Was there any holes with no bolts in them
If so u may need them to back the cover of
They act as pressing bolts

Other wise pry a screw driver or scraper into the gap and pry the gap open
 
Status
Not open for further replies.
Top