struggling acceleration/gear ratio question

Status
Not open for further replies.

bamarama

New member
Messages
4
Reaction score
0
I have a 10 tooth clutch and a 54 tooth sprocket currently on a medium sized one seater baha 200 go kart with meaty 10" tires. Recently i have boticed that my sprocket has almost extreme wear. I was looking into getting a little bigger sprocket 60 tooth or 72 tooth. This kart has good top speed but does struggle on takeoff and up hills. My gear ratio currently with the 54 tooth sprocket is 5.4:1. With a 60 tooth it would be 6:1, and with a 72 tooth it would be 7.2:1. My question is which sprocket would be best to not burn up clutches? I was thinking the 60 tooth because its in the middle. I guess im asking what y'all would do because its clearly struugling but once its rolling its good, i just want a little faster takeoff. Thanks fellas!!
 

Rail rider

Inmate # 3192016
Messages
792
Reaction score
6
Location
Planet earth ( the flat one)
Id go with the 60.. The 70 will really slow down the top speed. But 70 will climb... It's a happy medium that you have to find for your needs. What works for me may just make you mad.
 

chancer

ɔ ɥ ɐ u ɔ ǝ ɹ
Messages
9,358
Reaction score
97
Location
COMFORT, TEXAS
Depends on the height of your rear tires. 15" and under the 60
16" and taller go with the 72.

Also depends on your Wastline! How bigga boy are you?
 

bamarama

New member
Messages
4
Reaction score
0
This kart is for my two girls, one is 9 and the other is ten so they probably weigh a little over 100 lbs lol. I am 240 but ride it a little bit so i think for my girls the 60t will do the trick.

Sent from my LGL31L using Tapatalk
 

chancer

ɔ ɥ ɐ u ɔ ǝ ɹ
Messages
9,358
Reaction score
97
Location
COMFORT, TEXAS
Sorry I missed the Tire size. I would go with the 60 based on weight.
Based on 9 yr old Girls... 72 to slow down the top Speed.
Mine enjoys Donuts and drifting, the 72 will break the tires easier.
 
Status
Not open for further replies.
Top