Stingray Go kart kit wheel replacement

[Konman1994]

I recently broke both bearings on my rear passenger side tire On my stingray gokart kit and I can not find a wheel that will fit the axle on this kart I was wondering if anyone else had to replace the tires on this thing and where they found them.

Additional info: I found out the hard way that 3/4" inside diameter bearings are too big and 5/8" are too small and there are 2 different size bearings on this type wheel. I broke the bearings because I was turning around a corner and hit a half wall with the back wheel and both bearings broke. Yea I'm a bad driver

 

[qtband]

Do you need a rim, tire or bearings?
Pics could help.
Get a caliper and measure the bearings ID & OD. Then you can find replacement bearings. They could be metric.
Is this the Stingray from Northern Tool?

 

[OzFab]

3/4" inside diameter bearings are too big and 5/8" are too small

Then it's probably 17mm or 11/16"

 

[Konman1994]

I need either the rim, bearings or the whole wheel(tire, bearings, rim) and yes this is the one from northern tool. I just want to know if there is a replacement wheel that will fit the gokart chassis. I would prefer the entire wheel since part of the bearing that broke is jammed in the tire and WILL NOT COME OUT unless I have the hammer of Thor and an angled screw driver. Thanks in advance

 

[Konman1994]

Jammed in the rim I meant*