Steering and brake parts

[TKart]

Okay guys I have some more stuff from the shed. All are used take off units that someone could put to use.


Steering column, tie rods, spindle and hub assembly.
Column measures 15.5''
Tie rods from end to end are 27.75" while attached to column
Spindles and hub are 6.5" from mounting base to threads.
Overall assembled length is 40.75"

The spindles have zerk fittings and can be greased. If you need more specs on them let me know. The spindles are beefy and I've seen some nasty collisions where the frame bends before breaking one of these.

$75+shipping

Steering Column and tie rods (no spindles or hubs)
Same measurements as the above unit

$40+shipping

MCP Master Cylinder, caliper, rotor and aluminum hub...
Take off unit in good working condition. The rotor is grooved up but the hub is good.

$75+shipping


I aslo have 4 MCP calipers in good working order. Same caliper as above but these are by themselves with no supporting cast.

$40 each plus shipping


Paypal only.
Located in Southern California

 

[TKart]

MCP Calipers

 

[jamyers]

...
Steering column, tie rods, spindle and hub assembly.
...

Is this steering gear still available?

EDIT: never mind, re-found it on eBay, doh!

 

[TKart]

Is this steering gear still available?

EDIT: never mind, re-found it on eBay, doh!

Yup lol. It will go out in the morning. Thanks man!!!

 

[TKart]

Column hub spindle assembly sold. THanks Jamyers!!

 

[jamyers]

You're welcome! Goodies for my project...

 

[Don Qui Racing]

i am interested in the MCP master cylinder and calipers. do you still have any?

 

[TKart]

i am interested in the MCP master cylinder and calipers. do you still have any?

Sorry man no more mcp stuff but I do have the larger master cylinder and caliper setups. Some of the master cylinders from the parts shed are the old style Wilwoods and the FPX styles. Internally both are the same and perform the same. If you want one let me know. I have no more new old stock so I'd have to rebuild one.

 

[Don Qui Racing]

i have a 81 Dino racing kart. The breaks are old and out dated, i need something to replace them. if wilwood or fpx work then sure but i want to make sure first. thx here are some pics. i have the rotor and hub all ready. 30mm axle. i have talked to a rep at Dino in what ever country they are in and he couldnt help. would rather have a more up to date set up anyway. i am familiar with Wilwoods.

 

[TKart]

By looking at the pics you'd have to weld a bracket in place to use the larger caliper.Whats the diameter of your rotor?

 

[Don Qui Racing]

a bracket is no big deal. rotor is just shy of 7.5 inches.

 

[TKart]

I have two more steering linkage setups available if anyone is interested. I also will have a few frames for sale soon. If interested in the frame let me know because they will go to the scrap yard soon.

 

[ost911]

pm sent. also info on chassis?

 

[TKart]

pm sent. also info on chassis?

I have tons of hydraulic brake stuff laying around.

 

[MARGR4V3Z]

I have tons of hydraulic brake stuff laying around.

What exactly do you have? I am interested!

 

[TKart]

7" rotors and hubs with 1.25" center bore, mater cylinders, new and used calipers matching pads, steel braided lines...all this stuff is for concession karts that weigh like 400 pounds so on a light kart its guaranteed to snatch snot out of your nose. Heres a couple of pics of parts karts in my yard...pardon the rubber dust.

 

[TKart]

Heres a pic of the setup...everything will be used but in good condition. $65 shipped

single caliper rotor new pads ss braided line used master cyl

 

[Metalbender]

Are you in the states? It seems I'm gonna need a few pieces to bring a kart back from the grave...I'll pm you my number, hopefully we can help one another out...

 

[Metalbender]

Never mind I now see your in so cal...so that answers my question of if your in the states...pm sent to you

 

[ChriS2000]

PM sent, very interested.