Stalling problem help?!.?!?... Thanks!

Status
Not open for further replies.

ericspants

New member
Messages
11
Reaction score
0
Question?
So my cart dies when I'm hitting Hard bumps when I'm offroading or when Im powersliding Turing to the right only... Weird. The guy I bought it from said it was stalling out because of the killswitch... But I checked all te wiring and it all look tight.... Any suggestions?
 

KieranM

Doin It!!
Messages
1,409
Reaction score
3
Location
Kilkenny, Ireland
yea its the low oil sensor, it cuts out the engine if its low on oil to stop people with no knowledge of engines writing them off.
 

ericspants

New member
Messages
11
Reaction score
0
So which wire is that? ... Is that the yellow wire coming out of the forward side of the motor above the oil drain plug?
 

ericspants

New member
Messages
11
Reaction score
0
Yep that did the trick! No more stalling! At least for the little while I tested it! Thanks guys!
 
Status
Not open for further replies.
Top