sproket internal expanding drum brake

[appachee]

I'm not sure who makes this but I can't find one any where the closest thing to it is a manco cast aluminum split wheel with a drum brake sprocket assembly it has 60 teeth with a 4.10 3.50 4 tire on it I have seen these http://www.gokartsupply.com/tristar.htm but I don't know how it work with lining up with the clutch and chain

 

[qtband]

If you're getting the rim & sprocket, it'll probably be something you can use, provided that you have a 4.5" internal brake. If you have a cent. clutch, you can adjust it in or out some, same with the wheel. Have a pic of the rear of the kart?

 

[appachee]

I'll up load more pics of the rear and more pics of the wheel and sprocket need help with if I should try to use it or not and what cent, clutch to get

 

[appachee]

more pics

better pics of rearend and sprocket and I have no cent clutch or chain or clue on what to get

 

[itsid]

cool is that a hands wheel?
Some people on this forum would hit you with a stick for that

Anyways the sprocket you listed will be most likely the one you'll end up buying
(because of lacking alternatives)

If so, you WILL need a spacer to mount it to your wheel, because of the missing step down your's has.
The only of the shelf spacer I know is for the TriStar wheel (gks doesn't have it listed so see here
http://www.gokartgalaxy.com/4_5_band_brakes_and_components.htm

But it needs to match your wheel's bolthole circle.

or you have to make your own spacer..
like Ryan did here.

'sid

 

[appachee]

what is this rim called

can anybody id this rim

 

[Poboy kartman]

The rim is called obsolete. .....Seriously-maybe someone can ID it from the photos. ....but it would probably help if you included bearing hole size and bolt hole circle measurement. .....

 

[appachee]

I think the bearing is 5/8 id and 1 inch od and the bolt pattern is 6x2.75 and its a 4 inch rim the sprocket has 60 teeth and the brake hub has 4/12 inch diameter

 

[itsid]

... I still say it's a Hands wheel


http://www.ebay.com/itm/VINTAGE-GO-KART-4-INCH-HANDS-FRONT-REAR-RIMS-/181336596014

keep your eyes open, they pop up every now and then..

'sid

 

[appachee]

I thought you talking about my hand was in the picture I feel like a dumb *** im too new to this karting world

 

[OzFab]

Why were there two threads on this subject?

 

[itsid]

I thought you talking about my hand was in the picture I feel like a dumb *** im too new to this karting world

No problem..
Again there's no need to know every bit that's out there..
and the name of them is really easy to misunderstand

But yeah, that's basically what you're searching for.

Allow me to suggest to just keep what you have,
the rim looks to be in decent shape, only the inner
half is what you need

get those for example:
http://www.ebay.com/itm/Vintage-Go-Kart-NOS-4-Hands-Steel-Inner-Wheel-Halves-Pair-/261483346428

Then, a spacer and the sprocket you talked about earlier and you're good to go

'sid