Sprockets

[Benny530]

Hello everyone! I'm new here and first time trying to revive a man older Carter Bros Go Kart. I bought a frame recently and want to rebuild it for my son. I only got the frame. I did get a steering wheel, predator engine, clutch. I want to order the drive wheel (5") and sprocket, brake drum.. the only problem is that I don't know what size sprocket or chain or what I need exactly. I know the clutch I order is for that engine. Plus my axle is 3/4.
I have on my cart to get a
2 piece steel wheel 3-1/4, 5/8 ID bearing Flnaged Hub
41/2 Brake Band
60tooth Steel Sprocket #35 chain. IS THIS ALL I NEED to get it going??

I just want to make sure that whatever I order it will all work. All feedback greatly appreciated. Thanks

---------- Post added at 07:52 AM ---------- Previous post was at 07:38 AM ----------

I've emailed the manufacturer and three parts companies but haven't heard anything back.

 

[bob58o]

Difficult to say if that is all you need. How about you upload lots of pictures and let people here have a look.

Like do you have a DIYGK sticker yet?
Throttle / Brake Cables?

 

[ezcome-ezgo]

How many teeth on the clutch?

 

[Benny530]

12Teeth on Centrifugal

 

[ezcome-ezgo]

I think you've got the drive wheel covered, something tells me you'll need 3 more.

 

[KartFab]

some 5/16" bolts/nuts to mount the engine with washers might be a good thing to get. Those other 3 wheels also typically have bearings on them of a certain inner diameter and outer diameter, with a flange or snap ring, or not.

 

[Benny530]

MFG Supply is the company that I have things on a cart ready to buy. I don't have the wheel assembly at all need all that. And chain. Can you tell me what size sprocket, I need.

 

[ezcome-ezgo]

A 72 tooth and #35 chain are solid choices.

 

[KartFab]

60/10t for 41/420 or 72/12t for #35 give the same results in speed. I kinda prefer the 41/420 chain myself.

 

[Benny530]

Here are two pictures of what I "THINK" I need. Anything else? Besides the tire?

 

[Bbqjoe]

This here is a pretty good Sprocket!

Here Sprocket!!! Here Boy!!!!

 

[ezcome-ezgo]

Brake drum? Cables?

 

[Benny530]

Thanks for al info guys. I really appreciate it.

Ok I'll ad a brake drum. Do I need a sprocket holder? Or is that already on the rim that I have? I already have a cable for brake. I don't know what brake drum to get. They don't just make everything already assembled? Rim, sprocket, brake drum?

 

[ezcome-ezgo]

Drum and sprocket attach to the hub of the wheel. Drum has to work with the band, 4" I think.

 

[Benny530]

Is there any parts companies I can ordered from that are very good and may have the whole drive way assembly already put together l?