Spark Plug depth in 8hp Briggs head

Status
Not open for further replies.

jamyers

Well-known member
Messages
1,444
Reaction score
49
Location
Buffalo Gap, TX
Below is a pic of my 8hp head with the plug installed. The plug sure is shrouded up inside that hole, isn't it? Seems a wonder that it works at all being hidden way up in there...

Is there an extended-reach plug for these engines? If not, would it be a good idea to remove material from the top of the head so that the plug sits down lower and moves the plug gap into the chamber?

 

Russ2251

AZUSA:Powered by LAWN-BOY
Messages
6,622
Reaction score
47
Location
Huntington Station, Long Island, NY
I have old B&S (full cast iron) engines where plug is almost completely enclosed. Tends to minimize burning of oil...at least that is the theory.
Are you using the plug that is called out for by B&S?
 

jamyers

Well-known member
Messages
1,444
Reaction score
49
Location
Buffalo Gap, TX
I have old B&S (full cast iron) engines where plug is almost completely enclosed. Tends to minimize burning of oil...at least that is the theory.
Are you using the plug that is called out for by B&S?
Yup, stock plug, stock engine (for now). Sure reminds me of those "anti-foulers" for car engines - which do keep oil from the plug, but also fuel and air...
 

jamyers

Well-known member
Messages
1,444
Reaction score
49
Location
Buffalo Gap, TX
It should be a J19LM Plug! Those are the stock plugs. You can also run and Autolite 411 plug if you like!

(also posted over at the 4 Cycle Karting Forums)...

...is a Champion J19Lm. I just measured, and the head is 7/8" thick at the plug hole, the plug is roughly 1/2" from washer to tip, leaving the very tip of the plug 3/8" up inside the head.

Looking at Champion's website , it looks like there are lots of plugs that would physically fit and have 3/4" reach, which would equal the J19's 3/8" reach plus the 3/8" to get the tip/gap into the chamber. Only thing is, the only thing with a 19 heat range is a "tipless" racing plug. What about something like a RN57YC (one range hotter), or a RN16YC5 (one range cooler)?

Is the Autolite 411 a longer-reach plug?
 
Status
Not open for further replies.
Top