Some mod questions

Status
Not open for further replies.

Panhead5496

New member
Messages
908
Reaction score
7
Location
Athens, Georgia
Hey guys, didn't want to resurrect my past threads, since this is a different set of questions.

So I got my air intake (the K&N style one). Got it installed. Looks cool! Went ahead and cranked it up with the stock jet, stuttered and kept dying, guess that's why I need to better one. It is ordered and on the way (.035")

Now the question I what do I do with the hose that was attached to the old air filter contraption? (pointing to it in first pic)

Also, how do you know you have a proper seal with the billet adapter to the carb? I tried to tighten them evenly...

Lastly, got the muffler installed, or rather, just screwed it on :p Makes it look more finished I think. Is it supposed to get hot? After maybe 5 mins max of the engine running it was super hot. I burned my leg on it, never had that issue with the pipe?

Thanks for all the help guys, feel free to tell me what I did wrong :D
 

Attachments

  • IMG_8143.JPG
    IMG_8143.JPG
    98 KB · Views: 5
  • IMG_8144.JPG
    IMG_8144.JPG
    97.6 KB · Views: 4
  • IMG_8145.JPG
    IMG_8145.JPG
    76.9 KB · Views: 3
  • IMG_8146.JPG
    IMG_8146.JPG
    98 KB · Views: 5

pRoFiT

Can't buy it?, build it!
Messages
1,151
Reaction score
64
Location
California
Just picked up a mini bike with same setup. Tube is just hanging there. You need to have some breathing for the valve cover. You could add a filter on it. Something small. You don't want dust to get in there.
 

Panhead5496

New member
Messages
908
Reaction score
7
Location
Athens, Georgia
Just picked up a mini bike with same setup. Tube is just hanging there. You need to have some breathing for the valve cover. You could add a filter on it. Something small. You don't want dust to get in there.

Ok cool thanks. You mean the air filter sticking out needs a cover or the tube that is hanging needs a cover?
 

mckutzy

Well-known member
Messages
8,353
Reaction score
113
Location
bc, canada
The tube for the valve cover beather needs a filter...
An inline fuel filter, or a k&n breather filter will do.
 

Panhead5496

New member
Messages
908
Reaction score
7
Location
Athens, Georgia
I see what y'all are talking about now! Something like this?

http://m.ebay.com/itm/5PCS-SMALL-EN...%3A8c75835a15b0a9c4a24cdf52ffffe672%7Ciid%3A9

Looks a little ugly but if it will get the job done I don't care :D

About the jet...the videos I watched online never mentioned changing the e tube so I just ordered a bigger jet. When I cranked the engine yesterday and tried to give is gas it stuttered and died. Will a different jet make that big a difference?
 

Bubba_Z

Bubba_Z
Messages
156
Reaction score
1
Location
Western NC
:eek: Funny story. I added the air and exhaust kit to my 6.5, In my hurry I reinstalled the stock jet and Etube. Ran like crap, ran better with the choke on so i pulled the jet and measured the holes with go-nogo drill bits. Found my mistake
I added the larger jet AND etube, Runs like a champ. measured the etube holes and they are bigger. I'm no expert at this but mine runs great.

---------- Post added at 09:49 PM ---------- Previous post was at 09:44 PM ----------

Those filters look small and are for gas...not air. Look at WhiteTrashrocker's pic. Now if he would only tell us where he found that filter, I will buy 5 of them.....:surrender:

---------- Post added at 09:57 PM ---------- Previous post was at 09:49 PM ----------

"Lastly, got the muffler installed, or rather, just screwed it on :p Makes it look more finished I think. Is it supposed to get hot? After maybe 5 mins max of the engine running it was super hot. I burned my leg on it, never had that issue with the pipe? "

:rolleyes: Yes, Mufflers get hot. If you like I can print out a
"DO NOT TOUCH MAY BE HOT" sticker for you.....

Sorry, could not resist.....Don't get offended, just pulling your chain.
 

Bubba_Z

Bubba_Z
Messages
156
Reaction score
1
Location
Western NC
OMG, I love you...your not a democrat as I can see....
Capitalism is the American dream....How bout I send you 5 bucks for a link.....:popcorn:

I know, I know no Politics.....Sorry.
Sorry, could not resist.....Don't get offended, just pulling your chain.

:backtotopic:
 

Panhead5496

New member
Messages
908
Reaction score
7
Location
Athens, Georgia
LOL Bubba I'll take a sticker :D but really I was asking about the straight pipe. It got way hotter than without the muffler, maybe the air flow is decreased?

I looked around more and realized the gas filters aren't what I need lol. I'll try to find some ones like I need and report back.

I'll start with the jet and add the e tube it it doesn't work. Would it be possible to just drill the stock e tube?

---------- Post added at 05:42 PM ---------- Previous post was at 05:41 PM ----------

How about these? The price is right http://m.ebay.com/itm/Lot-Of-4-Univ...%3A92769ca715b0a6a92879756ffff2656d%7Ciid%3A1
 
Status
Not open for further replies.
Top