So lost with how to move forward. PLEASE HELP

Status
Not open for further replies.

Justmikein916

No idea what I'm doing
Messages
46
Reaction score
0
Location
Sacramento
I'm thinking I prob need to just buy a new clutch or torque convertor. What I would like to do is simply buy the part in picture that will fit onto a 1" shaft. I believe it's called a clutch plate but I could be wrong. Is it possible to just replace that one part? If not which is better, clutch or torque convertor. I'm running a harbor freight 420cc. Have had it for over a month now and haven't used simply cause I'm stuck on this dang part. Please, any help is so appreciated....
 

Attachments

  • IMG_20170524_001057.jpg
    IMG_20170524_001057.jpg
    180.5 KB · Views: 2
  • IMG_20170524_001104.jpg
    IMG_20170524_001104.jpg
    159.4 KB · Views: 2

Justmikein916

No idea what I'm doing
Messages
46
Reaction score
0
Location
Sacramento
I posted similar a few days ago however I can not find the thread and haven't been notified of any replies. I figured I must have goofed and not posted

---------- Post added at 12:42 AM ---------- Previous post was at 12:40 AM ----------

If you know how I can access the thread please do tell. Especially if there is helpful info. I am becoming so frusterated with this
 

karl

Well-known member
Messages
2,449
Reaction score
719
Location
North east Ohio
Based off the little information you gave us, You had a smaller motor with A fancy clutch. Now you are trying to install this clutch meant for a 6hp motor onto a 13hp predator? And you are frustrated its not working? But you like fanta?

Look into a 40 series torque converter kit. It can handle the power and fit your shaft. Thats all I can give you without pics and solid info.
 

Justmikein916

No idea what I'm doing
Messages
46
Reaction score
0
Location
Sacramento
Hate fanta and no I haven't been able to put it on but didn't even stop to think may e it wouldn't work with a larger engine. It was I stalled on a Honda GX270 9.0
 

Hellion

Staff Murderator
Messages
9,436
Reaction score
4,362
At least you're honest in that you don't know what you're doing. We don't know what you're doing either. :D
 
Status
Not open for further replies.
Top