Sizing help

Status
Not open for further replies.

D_CLARKE

New member
Messages
10
Reaction score
0
Need to know which starter recoil is going to fit my Greyhound 6.5 http://media.photobucket.com/image/recent/ceethese/Temp%252520Posted%252520Photos/LittleRedWagonpower1.jpg motor People tell me to get a BSP and replace it with the plastic ring from the old recoil BUT when i look online theres two different types of hole patterns in these recoils this one http://www.arcracing.com/servlet/the-67/BSP-clone-gx200-recoil/Detail and then there is this one http://ombwarehouse.com/BSP-Pull-Starter.html Some might just say "Count the bolts" the karts at my friends house so i cannot go check because hes gone. anyone have one of these and can tell me? :mad2::mad2: I just want my kart fixed
 

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
Need to know which starter recoil is going to fit my Greyhound 6.5 http://media.photobucket.com/image/recent/ceethese/Temp%252520Posted%252520Photos/LittleRedWagonpower1.jpg motor People tell me to get a BSP and replace it with the plastic ring from the old recoil BUT when i look online theres two different types of hole patterns in these recoils this one http://www.arcracing.com/servlet/the-67/BSP-clone-gx200-recoil/Detail and then there is this one http://ombwarehouse.com/BSP-Pull-Starter.html Some might just say "Count the bolts" the karts at my friends house so i cannot go check because hes gone. anyone have one of these and can tell me? :mad2::mad2: I just want my kart fixed

Actually- looking at those two images, I would say that bolt hole count doesn't matter. The recoil in the first pic has 6 holes, the second has 12. If, for example, your shroud has 3 holes, you could use either the 6 or 12, the 12 having more possible positions. The spread of the holes is what's critical here...
 
Status
Not open for further replies.
Top