Single pin master cylinder

[Five603]

I have a Kasea LM150 ll R and need to replace the master cylinder. The part number I have is 6.000.027 but it shows a two pin master cylinder.

Will the two pin master cylinder fit in the frame? If so can I replace the single pin spindle with a dual pin spindle?

Seems I would have to but I haven’t found them online yet. Anyone run into this problem?

 

[itsid]

I'd say chances are it does not fit..
there are several versions of the two pin also.. some with w wider collar some with a narrow one..
the narrow one might fit .. but I can't tell
this one looks to be the right size:
https://www.ebay.com/itm/183482491048

where did you get the part number from ..
if from a website, then it might be incorrect (matches a later model perhaps)
if it's from the original manual it should be correct.. but the part number might have been reused..
(the beauty of chinese manuafacturing standards )

'sid

 

[Five603]

I found this one online and the shipper relates it will fit. It’s aftermarket. I attached a photo.

What is the port below the cover and above the brake switch?

 

[itsid]

not a port at all.. that's a gauge glass

'sid

 

[Five603]

Cool thanks.

I considered that but I wasn’t sure. Looks like the eye on “The war of the worlds”. Lol

Excellent that very helpful.