set back

which one should i build?

  • side winder/ buggy

    Votes: 11 42.3%
  • awd road kart

    Votes: 4 15.4%
  • drag kart

    Votes: 0 0.0%
  • mini sand rail

    Votes: 11 42.3%

  • Total voters
    26
  • Poll closed .
Status
Not open for further replies.

modelengineer

Lord of the noise
Messages
1,609
Reaction score
2
Location
Sydney, Australia
 

Kaptain Krunch

Pro Junk Collector
Messages
4,636
Reaction score
4
Location
vermont
ok lets get back on i have a question about carb size?

1.2 gas carb from lakota racing or a 38mm mikuni from kaptian krunch

That mikuni is from a pretty high strung two stroke, so i have no clue if it will be too big or what.
 

Kaptain Krunch

Pro Junk Collector
Messages
4,636
Reaction score
4
Location
vermont
how many do you have i could use to of them

i have all 3, but i have been using them as parts for other carbs. I know for a fact i can put together at least 1 good one, but could possibly make 2 minus chokes and throttle cables. You'll have to buy the chokes seperate on ebay or something, just get chokes/cables from a twin cylinder sled, i didnt get the chokes with this sled, and really dont have any to spare.

I would be happy to refund you if they dont work, but you would have to pay for shipping back, and i couldnt refund the shipping there.
 

Rotore

Teh SPIK
Messages
1,663
Reaction score
1
Location
Caguas, Puerto Rico
i have all 3, but i have been using them as parts for other carbs. I know for a fact i can put together at least 1 good one, but could possibly make 2 minus chokes and throttle cables. You'll have to buy the chokes seperate on ebay or something, just get chokes/cables from a twin cylinder sled, i didnt get the chokes with this sled, and really dont have any to spare.

I would be happy to refund you if they dont work, but you would have to pay for shipping back, and i couldnt refund the shipping there.

ok how much for two of them? and do you have any old torque converters of sleds, shocks, tachs and what not
 

Kaptain Krunch

Pro Junk Collector
Messages
4,636
Reaction score
4
Location
vermont
ok how much for two of them? and do you have any old torque converters of sleds, shocks, tachs and what not

For the two, i'd do $25 +shipping? I'll make two good carbs, clean them, soda blast etc. Will just need chokes and cables.

As far as torque converters, i have a secondary, but thats probably not very useful, since you would need a matching driver, and all sled drivers are tapered. It is a good secondary though, 83' polaris, would do $25 for that too.

Sold my good shocks and tach.
 
Status
Not open for further replies.
Top