Seized engine!!!!

Status
Not open for further replies.

junkstang

New member
Messages
27
Reaction score
0
Yesterday my son was riding his go-kart and due to a lack of oil because it was pouring over the pto seal it locked up/seized. This go-kart has gone throught 3 boys and was well used the first time I saw it. We rebuilt the engine 3-4 years ago and the blocks chrank bearing journals were worn then and even with new seals the engine was leaking oil at the pto bearing just a day or two after reassembly. The engine ran well, but always leaked. It was bound to catch up with us sooner or later. Now we have a worn out and seized engine. What is the best replacement for this engine. A few engine suppliers have told me this engine is no longer reproduced. B&S Model 135212, Type 000602, and Code 9408122D. What is the best option for replacing this engine. My son is 13 has been working on the cart on his own and because he is showing interest I want him to be able to continue with the project. We work on my car projects all the time, but this project is his and I would like to enable him to keep it rocking. Any help would be appreciated. Thanks, Junkstang
 

r_chez_08

Should be in the shop...
Messages
4,827
Reaction score
14
Location
Cornwall, UK
Glad to hear from someone that is replacing an engine because it is actually worn out!
It doesn't sound worth rebuilding as you have already figured. You could probably find another similar engine from Craigslist new, what's your budget?
You could probably get a Briggs, Honda, subaru, techumseh or clone OHV or OHC motor.
Maybe consider an upgrade in HP whilst you are at it?
 

anderkart

Moderator
Messages
6,432
Reaction score
392
Location
Surprise Arizona USA
I've successfully done the ghetto-fix on a few kart/lawnmower engines that were seized from lack of oil.

I just sprayed a bunch of WD-40 or PJ Blaster down in the spark plug hole, let it sit overnight, then just stuck a wood/plastic/aluminum dowel down inside, positioned it about a 1/2" from the pistons edge and used a hammer to gently tap the piston down.

If it doesn't pop loose on the first hit, keep trying by moving your dowel around the piston and/or using longer soaking times. Even if you buy a new engine, It might be worth a try for a spare anyway...
 

r_chez_08

Should be in the shop...
Messages
4,827
Reaction score
14
Location
Cornwall, UK
The motor is 13ci =213cc
I would guess a 6hp.
A suitable replacement would be a Honda gx200 if you want an engine which has legendary reliability.
Dual bearing crank and iron bore.
 

junkstang

New member
Messages
27
Reaction score
0
Thanks for the reply. I would like to spend $300.00 or less, which eliminates the Honda engine immediately. I was unsure which engine would work or bolt up to the existing torque amplifer system.

junkstang
 

r_chez_08

Should be in the shop...
Messages
4,827
Reaction score
14
Location
Cornwall, UK
Torque converter? Which series? I assume it would be 3/4" bore. Most industrial engines under 8hp should be fine.
One of these may be good for you-
http://www.ebay.com/sch/i.html?_sacat=0&_nkw=subaru+robin+engine
Or a honda clone-
http://www.nr-racing.com/Clones.htm
Or a predator
http://www.harborfreight.com/predat...d-for-all-states-except-california-68120.html
Or a kohler
http://www.ebay.com/itm/Kohler-Engi...277?pt=LH_DefaultDomain_0&hash=item35ba4f88fd
Or a honda for $30 over
http://www.ebay.com/itm/Honda-200cc...583?pt=LH_DefaultDomain_0&hash=item416334eab7
Or a briggs (make sure cast iron bore and ball/roller bearing crankshaft for durability)
http://www.ebay.com/sch/i.html?_fro...&rt=nc&_pppn=r1&_mPrRngCbx=1&_udlo=&_udhi=300

An alternative to teach your son about engines-
Get a gx200 clone ($120) and buy some aftermarket parts- exhaust ($30), air filter ($20), springs ($10), rod ($60), flat top piston ($20) and a billet steel flywheel($60).

That would cost you around $300 and 9-11hp or so, depending on how well it is built. This may be too much for your torque converter. However, I am currently in the process of building a gx200 clone and it has taught me loads about the internals of an engine, and what improves RPM, torque and HP (I am 16)

Whatever option you choose, ask the seller if it has the same mounting pattern and shaft size as your existing motor. Then anything (within reason) should bolt up. However, chain adjustment may be needed, and clearance issues may be present.
Hope that helps.
 

r_chez_08

Should be in the shop...
Messages
4,827
Reaction score
14
Location
Cornwall, UK
That's a crazy deal for a 420 there!
However, mounting it would require different holes, and a different clutch would be required. If the OP is up for the extra expense and fabrication go for it.
Clutch options are - comet 40 series $300 or 1" centrifugal clutch $100.
However you could sell your current torque converter to pay for half of the comet 40, which would put the total at around $300 plus a jackshaft and some fab time.
 

junkstang

New member
Messages
27
Reaction score
0
Which engine is a gx200 clone? and where can you buy one for $120.00? Is it the Power Horse 208cc......??

Junkstang
 

r_chez_08

Should be in the shop...
Messages
4,827
Reaction score
14
Location
Cornwall, UK
See my link above- honda clone, 196cc. The yellow ones with no tank or governor are $119 +shipping.

The chineese engines with 208cc and 212cc are also good. They are usually bored and or stroked Honda clones with minor differences.

Edit: the z-208 is a 70mm bore gx200 clone (all parts except piston fit as far as I know)
Pretty sure most other 208 clones have different rod journals etc.
If you want to mod, IMO get a yellow clone or predator.
 

jamyers

Well-known member
Messages
1,444
Reaction score
49
Location
Buffalo Gap, TX
The Briggs 135212 (aka 5hp flathead) is prolly the most common engine ever made. Even though Briggs isn't making them anymore, there are TONS of parts out there from stock to all-out racing.

Probably the all-out cheapest/simplest replacement is a $50 decent used Briggs flatty. Check you local classified ads, Craigslist, etc - look for roto-tillers, pressure-washers, etc
 
Status
Not open for further replies.
Top